Example: Descriptions of Bend Notes
Bend Type
Description
Default Symbol
Configuration Option to Customize
Setting
Formed
Inside bend radius is equal to or less than ten times the sheet metal thickness.
(Inside Bend Radius =< Thickness * 10)
smt_bend_notes_type_formed
Formed state symbol
Rolled
Inside bend radius is greater than ten times the sheet metal thickness.
(Inside Bend Radius > Thickness * 10)
smt_bend_notes_type_rolled
Rolled state symbol
Up
Inside radius is on the sheet metal driving surface.
smt_bend_notes_direction_up
Bend note symbol for up
Down
Inside radius is on the sheet metal offset surface.
smt_bend_notes_direction_down
Bend note symbol for down
Angle value
The value of the inside angle of the bend. The bend angle displays according to the format set in the ang_units configuration option
45ยบ
N/A
Was this helpful?