About the Revolve Tool in Sheetmetal Design
Use the Revolve tool to create a sheet metal wall with revolve geometry. First sketch a section of the wall and then revolve it about a sketched axis or any linear geometry located on the sketch plane.
You can specify thickness for a first wall in a body when the body is not linked to the part. Keep in mind that additional options specific to Sheetmetal Design are available for the Revolve tool.
For more information on the Revolve tool, search the Help Center.
• Sketch for the Revolve feature:
• Sketch revolved 60°:
• Sketch revolved 270° (revolve direction flipped for clarity):
• Sketch revolved up to the selected reference plane:
• Sketch fully revolved:
