Vortex Shedding: Exercise 6—Analyzing Results
This exercise describes how the results are analyzed during and after the simulation. To hide CAD surfaces (not the fluid domain), switch between
CAD Bodies and
Flow Analysis Bodies in the
Show group. Clear any variable display by selecting
No Selection in the
Legend drop-down. Click
XYPlot Panel to view the XY Plot.
| 1. To show/hide selected geometric entities, click Show in View Panel. 2. To change the color scheme, click on More in the Legend and select between Blue Red and Blue Purple. |
Viewing the Vorticity on a Section
| Vorticity Z 1/s |
1. In the
Post-processing group, click
Section View and create a section.
Section 01 appears under Derived Surfaces.
2. Select Section 01.
3. In the Properties panel, Model tab, set values for the options as listed below:
◦ Type — Plane Z
◦ Position — 0.025
4. In the Properties panel, View tab, for Surface, set values for the options as listed below:
◦ Grid—No
◦ Outline—Yes
◦ Variable — Pressure [Pa] : Flow