Power Inverter without Heat Transfer: Exercise 2—Preparing the Mesh
1. In the Flow Analysis Tree, select Domains.
2. In the Properties panel, Mesh tab, for Mesh Generation, type the following values:
◦ Maximum Cell Size—0.02
◦ Minimum Cell Size—0.0007
◦ Cell Size on Surfaces—0.01
The values are retained as default settings. You can change these if required.
3. Click
Generate Mesh to create the mesh for the fluid domain. If the
Info dialog box opens, click
Yes to convert all the units.
4. Click
in the Graphics toolbar to display the style elements. Select
No Hidden,
Hidden Line, or
Wireframe to display the mesh.
5. Clear
CAD Bodies.
6. Enable
Flow Analysis Bodies.
7. In the Functions panel click
Turn on/off view properties and select the following from the list:
Hide all surfaces,
Hide all grids, and
Hide all outlines.
8. To view the surface, mesh or outline for a boundary, in the Flow Analysis Tree, under > > select the boundary POWERINVERTER_1_FLUID.
9. In the View panel, click
Show to display the selected boundaries.
10. In the Properties panel, View tab, set Grid, and Outline to Yes. The mesh for the boundary POWERINVERTER_1_FLUID appears as shown.