Base Model Simulation Exercise 4—Assigning Boundary Conditions
Specifying Inlet Boundary Conditions
1. Under Boundary Conditions, select Inlet.
2. In the Model tab, select the following values for the options listed:
◦ Flow—Specified Volumetric Flux
◦ Flow Direction—Inflow
◦ Value—0.01 m3/s
Specifying Outlet Boundary Conditions
1. Under Boundary Conditions, select outlet.
2. In the Model tab, select the following values for the options listed:
◦ Flow—Specified Pressure Outlet
◦ Pressure—0 Pa
Specifying Volume Conditions
1. To set the fluid, click 
Materials.
Materials.The Material Selection dialog box opens. Select Water under Material for the fluid domain.