To Create a Punch Axis Point
2. In Sketcher, in the Sketching group, click 
Point to create a construction point or in the Datum group, click 
Point to create a datum point.
Point to create a construction point or in the Datum group, click Point to create a datum point. | • Both Point tools create punch axis points. However, the Datum Point tool also creates an axis. • The punch axis point moves with the placement plane of its parent feature during the unbend and bend back operations. |
3. Place the construction point or datum point and then continue defining the cut, punch, or notch feature.
| | • After a sheet metal cut is created with punch axis points, Creo Parametric does not check for the punch_axis_points configuration option. • You cannot remove geometry axis points by setting the punch_axis_points configuration option to no. |