To Convert a Solid Part into a Sheet Metal Part
1. Open a solid body.
2. Click > > . The Convert tab opens.
3. If the solid body has geometry:
◦ For block-like geometry, use the
Shell tool.
4. If the solid body has no geometry, use the
Empty Body tool.
Using the Driving Surface Tool
Starting with Creo Parametric 5.0, when you convert a solid part to a sheet metal part you can include and exclude surfaces to obtain a constant wall thickness, recreate rounds and chamfers, and use additional options.
1. Click
Driving Surface.
2. The References tab opens by default.
a. Select the body to convert.
b. Select a surface to use as the driving surface for the sheet metal body. The selected surface shows in the Driving surface collector.
c. To include surfaces that are treated as face surfaces in the sheet metal body, click the Include surfaces collector and select one or more surfaces.
d. To exclude surfaces so that they are not treated as face surfaces in the sheet metal body, click the Exclude surfaces collector and select one or more surfaces.
3. Click Options to set one of the following options:
◦ Adjacent Rounds & Chamfers treatment—Controls the inclusion of rounds and chamfers in the sheet metal part.
▪ Recreate—Removes rounds and chamfers and recreates them after the part is converted to a sheet metal part.
▪ Remove—Removes the rounded geometry. The resulting geometry is similar to the geometry before the round operation.
▪ Ignore—Ignores the rounded geometry. The resulting geometry is without the rounded geometry.
| The following rounds and chamfers are supported for these options: • Rounds—Round design objects and automatically detected rounds even when there is no existing design object. • Chamfers—Chamfer design objects. |
◦ Keeps not classified surfaces as a separate quilt—Keeps surfaces that are not classified as the driving surface, additional surfaces, and excluded surfaces as separate quilts.
◦ Set driving surface opposite selected surface—Sets the surface opposite the selected driving surface as the driving surface.
4. In the Thickness box, set a value for the wall thickness.
5. Click
![](../../sheetmetal/sheetmetaldesign/images/flip116x16.png)
to flip the direction of thickness.
6. Click
![](../../sheetmetal/sheetmetaldesign/images/okay16x16.png)
. The
Convert tab closes, the part is converted to a sheet metal part, and the
Sheetmetal tab opens.
7. Create additional features as needed.
Using the Shell Tool
1. Click
Shell.
2. In the Thickness box, set a value for the wall thickness.
3. Click
![](../../sheetmetal/sheetmetaldesign/images/flip116x16.png)
to flip the direction of thickness.
4. The References tab opens by default.
a. Select the body to convert.
b. Select one or more surfaces to remove from the part.
5. Click
![](../../sheetmetal/sheetmetaldesign/images/okay16x16.png)
. The
Convert tab closes, the part is converted to a sheet metal part, and the
Sheetmetal tab opens.
6. Create additional features as needed.
Using the Empty Body Tool
An empty body is a body that has no geometry.
1. Click
Empty Body.
2. The References tab opens by default.
a. Select the body to convert.
3. Click
![](../../sheetmetal/sheetmetaldesign/images/okay16x16.png)
. The
Convert tab closes, the part is converted to a sheet metal part, and the
Sheetmetal tab opens.
4. Create additional features as needed.