Example: Descriptions of Bend Notes
|
Bend Type
|
Description
|
Default Symbol
|
Configuration Option to Customize
|
|---|---|---|---|
|
Formed
|
Inside bend radius is equal to or less than ten times the sheet metal thickness.
(Inside Bend Radius =< Thickness * 10)
|
 |
smt_bend_notes_type_formed
|
|
Rolled
|
Inside bend radius is greater than ten times the sheet metal thickness.
(Inside Bend Radius > Thickness * 10)
|
 |
smt_bend_notes_type_rolled
|
|
Up
|
Inside radius is on the sheet metal driving surface.
|
 |
smt_bend_notes_direction_up
|
|
Down
|
Inside radius is on the sheet metal offset surface.
|
 |
smt_bend_notes_direction_down
|
|
Angle value
|
The value of the inside angle of the bend. The bend angle displays according to the format set in the ang_units configuration option
|
45ยบ
|
N/A
|