Classic User Interface > Creo Elements/Direct Drafting User's Guide: Classic User Interface > Adding Text to a Drawing > Setting Fonts > Loading Fonts
Loading Fonts
Table 7 lists the Creo Elements/Direct Drafting fonts.
Table 8. Creo Elements/Direct Drafting Fonts
Font Name
Comments
osd_default
Default OSD font containing hp_i3098_v and hp_kanji2_c characters with variable character spacing
osd_default2
Default OSD font containing hp_i3098_c and hp_kanji2_c with fixed characters spacing
osd_default3
Default OSD font containing hp_d17_v and hp_kanji2_c with variable characters spacing
HP_Y14_5.FNT
Used for symbols only.
HP_BLK_C.FNT
Filled font with constant character spacing.
HP_BLK_V.FNT
Filled font with variable character spacing.
HP_D17_C.FNT
DIN17 font with constant spacing.
HP_D17_V.FNT
DIN17 font with variable spacing.
I3098_C.FNT
ISO3098 font with constant character spacing (=DIN 6776).
I3098_V.FNT
ISO3098 font with variable character spacing (=DIN 6776).
HP_JAS_C.FNT
Kanji Japanese font with constant character spacing.
HP_JAS_V.FNT
Kanji Japanese font with variable character spacing.
HP_SYMS.FNT
Symbols font.
HP_SYMS2.FNT
Symbols font.
If a particular font set has not been input into your hardware's memory, you can not access it. In this case, the font must be loaded:
1. Press TEXT 1.
2. Click LOAD FONT.
3. Enter the name of the font required, enclosed in quotation marks.
Having loaded a font set, you must make it current if you wish to use it.
4. Enter CURRENT_FONT "fontname"
where fontname is the full path name of the font-set file.
Was this helpful?