|
Using this Tutorial
- If you prefer you can view this tutorial as continuous web page and print it.
- Click Next or Previous at the top of each page to proceed through the tutorial.
- There is also a Next link at the bottom of each page.
- Carefully read all of the content on each page and perform the given steps before proceeding to the next step.
- In several cases, you may have to 'scroll down' on the tutorial page before continuing.
- You can navigate back to the starting page by using the Home link found at the bottom of each page.
- From the Home page, you can use the links provided to jump to a particular exercise.
- You will see various icons throughout the tutorial:
 Information is provided at the start of most tasks.
 Tips are provided along the way.
 Notes are provided as additional information.
- There are several conventions used when working with Pro/ENGINEER Wildfire 2.0:
- The "picks and clicks" are shown in Bold.
- Text that you enter is shown in Bold.
- Icons and their names are shown inline with the text.
- Names of models are shown in CAPS.
- Keyboard keys are shown in CAPS.
- You can adjust the font size of this tutorial using either of two methods:
- By clicking View > Text Size from the Internet Explorer window.
- By pressing CTRL and rolling the mouse wheel.
- Positioning the Tutorial and Pro/ENGINEER Wildfire 2.0 windows:
- Resize the tutorial to approximately 3" wide.
- Resize the Pro/ENGINEER Wildfire 2.0 window to approximately 3" narrower than the default.
- Position the tutorial on the left of the Pro/ENGINEER Wildfire 2.0 window as shown in the following figure. This will allow you to easily view the tutorial window while working.
- It is recommended that you maximize the amount of working area on your screen by setting your monitor to the highest resolution setting, for example 1600x1200.
Positioning Tutorial Window | |
Previous
Printable Version