Data Management Capabilities > Managing Part Structures > Part Structure Browser > Part Structure Actions > Reports Action Set - Parts
  
Reports Action Set - Parts
The Reports action set is located in the Structure tab toolbar on a part information page.
Standard Part Structure Reports
Click the Reports icon to see a list of standard part structure reports available with Windchill. The reports are generated using the structure of a part selected in the structure pane. The following table describes the reports that are provided:
Report
Description
Multi-Level Components List
Displays a consolidated list of components and their quantities within an entire part structure. Unlike the Multi-Level BOM report, this report does not list the levels of the parts and does not illustrate the part-component relationships. Each component is only listed once with a consolidated total quantity.
Single-Level Consolidated BOM
Displays all parts and their quantities that are directly used by a selected assembly part. A component used multiple times is listed only once with a consolidated total quantity.
Single-Level BOM
Displays the parts directly used by a selected assembly part. Child parts used more than once are displayed individually. Information pertaining to the part and uses relationship is displayed.
Single-Level BOM with Notes
Displays the parts directly used by a selected assembly part. Also displays the bill of material notes associated with each part. Child parts used more than once are displayed individually.
Multi-Level BOM
Displays an indented bill of material for all levels of a selected assembly part. Child parts used more than once in an assembly are displayed individually. Information pertaining to the part and uses relationship is displayed.
Multi-Level BOM with Replacements
Displays an indented bill of material for all levels of a selected assembly part with the alternates and substitutes that can be used as replacement parts displayed beneath each part.
Multi-Level BOM with AML/AVL
Displays an indented bill of material for all levels of a selected assembly part structure with information about manufacturer and vendor.
Multi-Level BOM with AML
Displays an indented bill of material for all levels of a selected part structure with information about the manufacturer.
Single Source OEM Parts
Displays original equipment manufacturer parts that have only one manufacturer with an Approved and/or Preferred sourcing status.
* 
This report is available when Windchill Supplier Management is installed.
Unique Manufacturer Parts
Displays a list of manufacturer parts associated with the current part structure, listing them only once even if the part has multiple occurrences.
* 
This report is available when Windchill Supplier Management is installed.
Change Baseline
Shows change history and anticipated changes for a parts and associated documents in a part structure. For more information, see Creating the Change Baseline Report.
* 
The change baseline report is available when the Change Baseline Report Display preference is set to yes.
Impact Analysis Report
Displays associated service objects that are impacted by change in a related part. For more information, see About Impact Analysis Report.
* 
This option is available only in a Windchill Service Information Manager system.
Exporting Part Structure Reports
Part structure reports may be exported from Windchill to a file on your desktop. Use the following procedure to export a part structure report:
1. Navigate to the information page of the part for which the report will be generated.
2. Select the part for which the report will be generated in the structure pane on the left.
3. Select the desired report from the Reports list in the actions toolbar. The report is generated in a new window.
4. Select the desired export file format from the Actions > Export List to File menu above the report table.
5. You will be prompted to open or save the exported file by your browser. The prompt you receive will depend on the browser that you use.
Exporting Structure Information to a File
Part structure information contained in the Structure tab can be directly exported to a file on your desktop using the export list to file action. Use the following procedure to export part structure information:
1. Expand the part structure to display the branches you wish to be included in the exported file.
* 
The exported file will contain only the part structure branches and attribute values that are displayed.
2. Click the export list to file icon and select a file format from the drop-down menu.
3. You will be prompted to open or save the exported file by your browser. The prompt you receive depends on the browser that you use.
* 
The name of the exported file is derived from the top part in the part structure.
* 
The export list to file icon is also available in the Uses and Occurrences tab toolbars within the Structure tab. For more information, see Editing in the Uses Tab and Editing in the Occurrences Tab.