Sample Projects and Use Cases > Blue Pump Tutorial > View the Experience in Vuforia View
View the Experience in Vuforia View
It’s time to view the completed project!
1. Place the appropriate ThingMark on a flat surface where you can easily interact with it.
2. From your supported mobile device, open Vuforia View.
3. Point the camera of your device at the ThingMark.
4. Vuforia View alerts you with a sound or vibration once the ThingMark has been scanned successfully, and a list of available experiences appears. The experiences in the list have all been associated with the particular ThingMark that you scanned.
5. Select the Blue Pump Demo experience you just published.
6. Wait a moment with your device still pointed at the ThingMark.
If the model is large, a progress indicator appears. Try not to move the mobile device until this loading process completes.
Slowly move your mobile device further away from the ThingMark so that you can view the entire experience.
7. Once the experience loads, you can interact with the various components of your AR experience:
As you move the mobile device around (while still pointed at the ThingMark), the blue pump moves as well. This allows you to view the model from different angles.
The 3D label displaying the RPM value is visible, and the value changes every 3 seconds. In addition, the 3D Label is always be facing towards you, regardless of how you move around the ThingMark.
If you press the Play button one time, the disassembly animation plays. If you press the Play button a second time, the pump reassembles itself.
If you press the Info button, the card appears in the middle of the screen with the information you added. If you press the Info button again, the information disappears.
If you press the “i” button, the 3D Label appears or disappears each time your press it.