To set up a default server connection for the Integrity Lifecycle Manager server and online help
1. Do one of the following to open the Preferences Configuration dialog box:
◦ In the Integrity Lifecycle Manager client GUI, select > . The Preferences Configuration dialog box displays.
|
|
If this is your first time starting the client or there are no open ViewSets, a selection dialog box displays. Click Preferences.
|
◦ In the Administration Client, select > . The Preferences Configuration dialog box displays.
|
CLI EQUIVALENT
|
im viewprefs –g
|
2. In the tree pane, select > . The Connection pane displays.
3. Under Default Server Connection and Online Help, specify the following options:
◦ In the Host Name field, type the name (for example, xyz-server) or numerical IP address (for example, 1.2.34.56) of the default Integrity Lifecycle Manager server.
◦ In the Port field, type the port number of the default Integrity Lifecycle Manager server, for example, 7001.
|
|
If a proxy server is defined for the default Integrity Lifecycle Manager server, then help is retrieved from the server defined in your client’s Proxies preference. Do not define a proxy in the Default Server Connection and Online Help fields.
|
4. To save your changes, click OK.
The host name and port are tested to ensure the connection is valid and the server is available (this may take a few minutes to complete). Once the validation completes successfully, help is accessible on the server.
For more information on setting up help, see your administrator.
