.Modify Pipe Dimension
* Press Dimension under Modify Pipe.
* Select the through pipe in Plate 2.
* Press Length and key-in 350.
* Click .
Modify Pipe Position
* Press Position under Modify Pipe.
* Select the second angular pipe.
* Press -X, as the moving direction.
* Key-in 30 in the length box.
* Click .
Modify Pipe Add
* Press Add under Modify Pipe
* Press Pipe Cycle button and select one of the pipes in Plate2.
This sets the cycle to which the pipe will be added. When adding components to this pipe it will be added to the correct cycle and created under the correct assembly cycle in the browser.
Follow the same steps as before to add the new pipe, select face, position diameter etc.
Modify Pipe Remove
* Press Remove under Modify Pipe.
* Select from the screen the last pipe you added, or any other pipe. If you want to delete the entire pipe cycle check the Cycle check box.
If there are components added to that pipe/cycle they will be removed too.
* Click .