To Cross-Select Matching Data in 3D and Schematic Figures
Only published illustrations that contain matching 3D and Schematic data are available for cross-selection. Use the split screen option to view both (or all) figures.
1. Click > . Cross-selection is enabled between the two views.
2. Select one or more parts or items in the active figure. The items are selected automatically in the sBOM for the active figure and in the receiving views.
3. To register one or more views as receiving views, do any of the following operations:
◦ Select one or more names of views from the list
◦ Select Enable All Views
4. To toggle cross-selection mode on and off with the same settings, click > .
Cross-Select Mode. Cross-selection is enabled between the two views.