Creo Simulate > Creo Simulate > Additional Information > Background Information > Bibliography
  
Bibliography
This document contains a bibliography of information on topics relevant to Creo Simulate. The bibliography is divided into the following sections:
General Finite Element
Fatigue
P-method
Optimization
Mechanics
Formulas and Numerical Results
Heat Transfer
General Finite Element
Bathe, Klaus-Jurgen. Finite Element Procedures in Engineering Analysis. Englewood Cliffs, NJ: Prentice-Hall, 1982.
Bonet, Javier, and Richard D. Wood. Nonlinear Continuum Mechanics for Finite Element Analysis. New York: Cambridge University Press, 1997.
Hughes, Thomas J.R. The Finite Element Method: Linear Static and Dynamic Finite Element Analysis. Englewood Cliffs, NJ: Prentice-Hall, 1987.
Kardestuncer, H., and Norrie, D. H., eds. Finite Element Handbook. New York: McGraw-Hill, 1987.
Zienkiewicz, O.C. The Finite Element Method. New York: McGraw-Hill, 1988.
Fatigue
Baumel, A. and Seeger, T. "Materials Data for Cyclic Loading, Supplement 1." Materials Science Monographs, 61. Pub: Elsavier.
Morrow, J. "Fatigue Design Handbook." Advances in Engineering. Vol. 4. Society of Automotive Engineers, Warrendale, PA. (1968): Sec 3.2, pp 21–29.
Smith, K. N., Watson, P., and Topper, T. H. "A Stress-Strain Function for the Fatigue of Metals." Journal of Materials. Vol. 5, No. 4, (1970): 767–778.
p-Method
Babuska, I., and Suri, M. "The p- and h-p Versions of the Finite Element Method, an Overview." Computer Methods in Applied Mechanics and Engineering. 80 (1990): 5–26.
Babuska, I., and Szabo, B. "On the Rates of Convergency of the Finite Element Method." International Journal for Numerical Methods in Engineering. 18 (1982): 323–341.
Babuska, I., Szabo, B., and Katz, I. N. "The p-Version of the Finite Element Method." Society for Industrial and Applied Mathematics. (1981): 515–545.
Szabo, B. "Geometric Idealizations in Finite Element Computations." Communications in Applied Numerical Methods. 4 (1988): 393–400.
Szabo, B. "Mesh Design for the p-Version of the Finite Element Method." Computer Methods in Applied Mechanics and Engineering. 55 (1986): 181–197.
Szabo, Barna, and Ivo Babuska. Finite Element Analysis. New York: Wiley, 1991.
Szabo, B., and Sahrmann, G. "Hierarchic Plate and Shell Models Based on p-Extension." International Journal for Numerical Methods in Engineering. 26 (1988): 1855–1881.
Optimization
Bennett, J.A., and M.E. Botkin. The Optimum Shape. New York: Plenum, 1986.
Haug, Edward J., and Jasbir S. Arora. Applied Optimal Design. New York: Wiley, 1979.
Haug, Edward J., Kyung K. Choi, and Vadim Komkov. Design Sensitivity Analysis of Structural Systems. London: Academic Press, 1986.
Vanderplaats, Garret N. Numerical Optimization Techniques for Engineering Design. New York: McGraw-Hill, 1984.
Wismer, David A., and R. Chatterly. Introduction to Nonlinear Optimization. New York: North-Holland, 1983.
Mechanics
Gere, James M., and Stephen P. Timoshenko. Mechanics of Materials. 2nd ed. Monterey, CA: Brooks/Cole Engineering Division, 1984.
Jones, Robert M. Mechanics of Composite Materials. Washington, D.C.: Scripta Book Company, 1975.
Popov, E. P. Introduction to Mechanics of Solids. Englewood Cliffs, NJ: Prentice-Hall, 1968.
Reddy, J. N. Energy and Variational Method in Applied Mechanics. New York: John Wiley & Sons, 1984.
Shigley, Joseph Edward Mechanical Engineering Design. 3rd ed. New York: McGraw-Hill, 1977.
Timoshenko, S. P., and J.N. Goodier. Theory of Elasticity. New York: McGraw-Hill, 1970.
Tsai, Stephen W. Composites Design. 4th ed. Dayton, OH: Think Composites, 1988.
Tsai, Stephen W., and H. Thomas Hahn. Introduction to Composite Materials. Westport, CT: Technomic Publishing Co., 1980.
Ugural, A. C. Stresses in Plates and Shells. New York: McGraw-Hill Book Company, 1981.
Formulas and Numerical Results
Blevins, Robert D. Formulas for Natural Frequency and Mode Shape. New York: Van Nostrand Reinhold Co., 1979.
Roark, Raymond J., and Warren C. Young. Formulas for Stress and Strain. 5th ed. New York: McGraw-Hill, 1975.
Section 5.A.4.1.2 of the 2010 ASME Boiler and Pressure Vessel Code, VIII Division 2, Alternative Rules, Rules for Construction of Pressure Vessels.
Heat Transfer
Holman, J. P. Heat Transfer. 6th ed. New York: McGraw-Hill, 1986.
Incropera, Frank P., and David P. Dewitt. Fundamentals of Heat Transfer. New York: Wiley, 1981.
Kreith, Frank, and Mark S. Bohn. Principles of Heat Transfer. 4th ed. New York: Harper & Row, 1986.