Creo Tutorials > Creo Flow Analysis Tutorials > Beginners Tutorials > Tutorials > Tutorial 1 - Without Heat Transfer: Power Inverter > Without Heat Transfer: Power Inverter Overview
  
Without Heat Transfer: Power Inverter Overview
The objective of this simulation is to study the air flow inside a power inverter. Air enters the inlet at a specified pressure of 101325 Pa and exits with a volumetric flux of 0.001 m3/s. You can see the geometry and conditions for the simulation in the figure below:
1. Inlet
2. Inflow Direction
3. Outflow Direction
4. Outlet
Air Density = 1.1614 kg/m3
Air Viscosity = 1.846e-05 Pa.s
The exercises in the Flow Analysis simulation are:
• Without Heat Transfer: Power Inverter Exercise 1—Extracting the Fluid Domain
• Without Heat Transfer: Power Inverter Exercise 2—Preparing the Mesh
• Without Heat Transfer: Power Inverter Exercise 3—Defining Physics Modules
• Without Heat Transfer: Power Inverter Exercise 4—Assigning Boundary Conditions
• Without Heat Transfer: Power Inverter Exercise 5—Creating a Monitoring Point
• Without Heat Transfer: Power Inverter Exercise 6—Performing the Simulation
• Without Heat Transfer: Power Inverter Exercise 7—Analyzing Results