To Redefine Relief for an Attached Flat Wall
1. Select an attached flat wall from the Model Tree or the graphics window. Right-click and choose
from the shortcut menu. The
Flat tab opens.
2. Click Relief. The Relief tab opens.
3. Select a relief type to apply to both sides of the wall. For a Stretch relief, set the angle value and width. For Rectangular and Obround reliefs, set values for the depth, length, and width. The relief dynamically updates.
4. To define a relief type for each side of the wall, click Define each side separately and select a side and a type of relief.
5. Click
.