Sheetmetal > Designing in Sheetmetal Design > Creating and Modifying Walls > Creating Walls > Helical Swept Walls > About the Helical Sweep Tool in Sheetmetal Design
  
About the Helical Sweep Tool in Sheetmetal Design
Use the Helical Sweep tool to create a sheet metal wall or surface with helical sweep geometry. When a helical swept wall is not the first wall, use the tool to create a solid cut. First sketch the helix sweep profile and define an axis of revolution. Then sketch a section to sweep along the profile. Finally, define the pitch (the distance between coils).
You can redefine a helical swept wall as a surface, or a helical swept surface as a wall, if the wall is not the first one in a design. You must specify thickness for a first wall. Keep in mind that additional options specific to Sheetmetal Design are available for the Helical Sweep tool.
For more information on the Helical Sweep tool, search the Help Center.