To Place a Manikin into a Scenario
1. Open a saved design assembly into which to place the manikin.
2. Click
Manikin >
Insert Manikin. The
Open dialog box showing the manikin library and the
Place Manikin dialog box open.
|  For information about setting the path to the library, see the Related Links. |
3. In Open dialog box, select a manikin model from the list, and click Open.
4. In the Place Manikin dialog box, select or clear the Use placeholder check box.
| By default, the manikin model is automatically assembled into a placeholder assembly before it is inserted into the design scenario. Although this is considered the best practice, you can clear the placeholder check box to insert a manikin model without a placeholder assembly. |
5. Type a name for the manikin model or accept the default name.
6. To set the manikin’s posture, select the Standing or Sitting check box.
7. To select a surface for the manikin to stand or sit on, click the
Place on collector, and select a curved or flat surface. Click
to flip the direction 180°.
8. To select a direction for the manikin to face, click the
Facing collector, and select a surface or datum plane. Click
to flip the direction 180°.
9. Click OK.