To Create a Lead Out Tool Motion
With this tool motion you can make the tool exit from the current point tangentially along an arc of specified radius.
1. On the Trajectory, Face, or Manual Cycle tab, select Lead Out in the Tool Motions list.
The Lead Out dialog box opens.
2. Reference cut—Displays the referenced cut name.
3. Exit Angle—Define the angle of the arc.
4. Tangent Lead Step option allows you to define the length of the linear movement that is tangent to the lead-out motion.
5. Normal Lead Step—Define the length of the linear movement that is normal to the tangent portion of the lead-out motion.
6. Lead Radius—Specify the radius of the arc.
7. Click Parameters to edit the tool motion parameters using the Edit Parameters dialog box.
8. Click OK to create the exit motion or click Cancel to cancel.