Example: Pencil Tracing Using Angular Limits
In Figure 1 contact angles of 15° and 60° are set to create passes between the two contact points, which are indicated by black lines. Figures 2 and 3 show the resultant passes with this setting.
Figure 1
Figure 2
In this figure lower angular limits are used to calculate pencil tracing passes. Here the parameter CONTACT_ANG_LOW is set to 0° and CONTACT_ANG_HIGH is set to 70°.
Figure 3
In this figure higher angular limits are used to calculate pencil tracing passes. Here the parameter CONTACT_ANG_LOW is set to 0° and CONTACT_ANG_HIGH is set to 90°.
