Cabling > Component, Connector, and Pin > Adding Components > Adding Components to Flat Harness
  
Adding Components to Flat Harness
To Include Components in a Flat Harness
To Modify the Attachment Location of a Component to a Harness
To Remove a Component from a Flat Harness
To Include Components in a Flat Harness
1. Ensure that the component reference at the routing location is a coordinate system so that you can attach the component to a flat harness.
2. Click Components > Attach to Harness. The ATT HARN menu appears.
3. Click Add and select one or more components on the model to attach to the flat harness.
4. If the component references multiple locations, select a location along the axis on the component at the routing location. The component is attached to the flat harness.
5. Click Done/Return.
To Modify the Attachment Location of a Component to a Harness
1. Ensure that the component reference at the routing location is a coordinate system so that you can attach the component to a flat harness.
2. Click Components > Attach to Harness. The ATT HARN menu appears.
3. Click Mod Location and select a component to modify its attachment location.
4. Select a location to which you want to attach the component and click Done/Return. The attachment location of the component is modified.
To Remove a Component from a Flat Harness
1. Ensure that the component reference at the routing location is a coordinate system so that you can attach the component to a flat harness.
2. Click Components > Attach to Harness. The ATT HARN menu appears.
3. Select one or more components to remove from the flat harness and click Done/Return.