To Specify Parameter Values Individually
1. Click
Cabling Parameters. You can select a component in the Model Tree or graphics window, right-click, and choose
Cabling Parameters. You are prompted to select a cabling component.
2. To ensure that you select a correct cabling object, click
Tools >
Find, and select the required object.
or
Select the wires, cables, components, or connectors that you want to modify.
3. Click OK. The Electrical Parameters dialog box opens.
4. Under Display For, select appropriately to show or hide the parameters display for different levels of the tree in the left panel. For example, for a component, pin, conductor, entry port, and so on.
5. Select the parameter you want to edit in the right panel of the dialog box.
6. Type a new value for the parameter in the Value box and press ENTER. The new value for the selected parameter appears in the right panel of the Electrical Parameters dialog box.
7. Click Apply and then OK.
|  Both the cable or wires and bundles cannot be displayed together in the Electrical Parameters dialog box. |