Creo NC 판금 > NC Sequencing > About NC Sequences
  
About NC Sequences
An NC sequence is a workpiece feature that represents a single tool path. You must set up a process environment before creating an NC sequence. The type of workcell defines the types of NC sequences available, as shown in the following table.
NC Sequence
Punch
Laser
Laser-Punch
Flame
Flame-Punch
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
When you create an NC sequence, a dialog box corresponding to the NC sequence type is displayed. Each of these dialog boxes has the following options:
• Parameter—Open the parameter tree.
• Comment—Type comments regarding NC sequences.
• Define—Specify the tool, parameters, and geometric references. You can also apply some low-level control depending on the NC sequence type.
• Info—Display parameter and NC sequence information.
• Preview—Display the tool path for the NC sequence prior to completion of the NC sequence. Available after all elements have been defined.
• Done—Completes creation of the current NC sequence.
• Cancel—Terminates the creation of the current NC sequence after confirmation.
• Next—Completes the current NC sequence and starts creating another Nibble Edge NC sequence with the same tool and parameters.