About Splices
You can splice wires together using the splice function. You can create two kinds of splices:
• Butt splices—the wire is split into two separate wires and a one-pin component (the butt splice) is placed at the point of separation.
• Through splices—the one-pin component (the through splice) is placed on the wire without splitting the wire. Additional wires can then be routed to the splice.
|
|
 注記 Before you create a splice, you must create a symbol with a single node. |
When you create or move a splice, note that:
• A butt splice splits the wire it is placed on into two separate wires and does not move when the wire it is placed on is moved.
• A through splice does not split the wire it is placed on and moves with it.
|
|
注記 A component or connector that is being placed can also be inserted into an existing wire as a splice.
|