Progettazione di stampi e colata > Verifying Models > About the Mold Analysis Dialog Box
  
About the Mold Analysis Dialog Box
The Mold Analysis dialog box opens in all mold-related modules: Mold Cavity mode, Cast Cavity mode, Mold Layout, Mold/Casting Part-mode application. In Part mode, the part is selected automatically, and you cannot select the corresponding element in the Mold Analysis dialog box.
To open the Mold Analysis dialog box, click Analysis > Mold Analysis on the Mold or Cast tab.
Use the Mold Analysis dialog box to apply the waterlines checks.