Ce document contient une bibliographie d'informations portant sur les sujets relatifs à Creo Simulate. Cette bibliographique est séparée selon les sections suivantes :

Bathe, Klaus-Jurgen. Finite Element Procedures in Engineering Analysis. Englewood Cliffs, NJ:Prentice-Hall, 1982.

Bonet, Javier et Richard D. Wood. Nonlinear Continuum Mechanics for Finite Element Analysis. New York : Cambridge University Press, 1997.

Hughes, Thomas J.R. The Finite Element Method:Linear Static and Dynamic Finite Element Analysis. Englewood Cliffs, NJ:Prentice-Hall, 1987.

Kardestuncer, H. et Norrie, D. H., eds. Finite Element Handbook. New York : McGraw-Hill, 1987.

Zienkiewicz, O.C. The Finite Element Method. New York : McGraw-Hill, 1988.

Baumel, A. and Seeger, T. "Materials Data for Cyclic Loading, Supplement 1." Materials Science Monographs, 61. Pub : Elsavier.

Morrow, J. "Fatigue Design Handbook." Advances in Engineering. Vol. 4. Society of Automotive Engineers, Warrendale, PA. (1968) : Sec 3.2, pp 21–29.

Smith, K. N., Watson, P., and Topper, T. H. "A Stress-Strain Function for the Fatigue of Metals." Journal of Materials. Vol. 5, No. 4, (1970) : 767–778.

Babuska, I., and Suri, M. "The p- and h-p Versions of the Finite Element Method, an Overview." Computer Methods in Applied Mechanics and Engineering. 80 (1990) : 5–26.

Babuska, I., and Szabo, B. "On the Rates of Convergency of the Finite Element Method." International Journal for Numerical Methods in Engineering. 18 (1982) : 323–341.

Babuska, I., Szabo, B., and Katz, I. N. "The p-Version of the Finite Element Method." Society for Industrial and Applied Mathematics. (1981) : 515–545.

Szabo, B. "Geometric Idealizations in Finite Element Computations." Communications in Applied Numerical Methods. 4 (1988) : 393–400.

Szabo, B. "Mesh Design for the p-Version of the Finite Element Method." Computer Methods in Applied Mechanics and Engineering. 55 (1986) : 181–197.

Szabo, Barna et Ivo Babuska. Finite Element Analysis. New York : Wiley, 1991.

Szabo, B., and Sahrmann, G. "Hierarchic Plate and Shell Models Based on p-Extension." International Journal for Numerical Methods in Engineering. 26 (1988) : 1855–1881.

Bennett, J.A., and M.E. Botkin. The Optimum Shape. New York : Plenum, 1986.

Haug, Edward J. et Jasbir S. Arora. Applied Optimal Design. New York : Wiley, 1979.

Haug, Edward J., Kyung K. Choi et Vadim Komkov. Design Sensitivity Analysis of Structural Systems. London:Academic Press, 1986.

Vanderplaats, Garret N. Numerical Optimization Techniques for Engineering Design. New York : McGraw-Hill, 1984.

Wismer, David A. et R. Chatterly. Introduction to Nonlinear Optimization. New York : North-Holland, 1983.

Gere, James M. et Stephen P. Timoshenko. Mechanics of Materials. 2ème éd. Monterey, CA : Brooks/Cole Engineering Division, 1984.

Jones, Robert M. Mechanics of Composite Materials. Washington, D.C.:Scripta Book Company, 1975.

Popov, E. P. Introduction to Mechanics of Solids. Englewood Cliffs, NJ:Prentice-Hall, 1968.

Reddy, J. N. Energy and Variational Method in Applied Mechanics. New York : John Wiley & Sons, 1984.

Shigley, Joseph Edward Mechanical Engineering Design. 3ème éd. New York : McGraw-Hill, 1977.

Timoshenko, S. P. et J.N. Goodier. Theory of Elasticity. New York : McGraw-Hill, 1970.

Tsai, Stephen W. Composites Design. 4ème éd. Dayton, OH : Think Composites, 1988.

Tsai, Stephen W. et H. Thomas Hahn. Introduction to Composite Materials. Westport, CT :Technomic Publishing Co., 1980.

Ugural, A. C. Stresses in Plates and Shells. New York : McGraw-Hill Book Company, 1981.

Blevins, Robert D. Formulas for Natural Frequency and Mode Shape. New York : Van Nostrand Reinhold Co., 1979.

Roark, Raymond J. et Warren C. Young. Formulas for Stress and Strain. 5ème éd. New York : McGraw-Hill, 1975.

Section 5.A.4.1.2 du code ASME 2010 relatif aux chaudières et aux appareils à pression, VIII Division 2, Autres règles, Règles pour la construction des appareils à pression.

Holman, J. P. Heat Transfer. 6ème éd. New York : McGraw-Hill, 1986.

Incropera, Frank P. et David P. Dewitt. Fundamentals of Heat Transfer. New York : Wiley, 1981.

Kreith, Frank et Mark S. Bohn. Principles of Heat Transfer. 4ème éd. New York : Harper & Row, 1986.