|
Shortcut Key
|
Action
|
|
ALT
|
• Disables filters temporarily during selection when the pointer is in the graphics window. Hold down the ALT key during selection.
• Activates KeyTips on the Ribbon when you point to the Ribbon and hold down the ALT key.
|
|
CTRL
|
Temporarily hides the Live Toolbar in 3D part and assembly modes.
|
|
CTRL+A
|
Activates a window.
|
|
CTRL+C
|
Copies the selection to the clipboard.
|
|
CTRL+D
|
Displays a model in the default view.
|
|
CTRL+N
|
Opens the New dialog box.
|
|
CTRL+O
|
Opens the File Open dialog box.
|
|
CTRL+R
|
Repaints a window.
|
|
CTRL+S
|
Opens the Save Object dialog box.
|
|
CTRL+V
|
Pastes the clipboard contents to the selected location.
|
|
CTRL+Y
|
Performs a single-step redo operation.
|
|
CTRL+Z
|
Performs a single-step undo operation.
|
|
ESC
|
Performs one of the following operations depending on the modeling context:
• Cancels an operation.
• Clears the selection in the graphics window.
• Cancels a dragger operation.
• Closes the Live Toolbar.
• Cancels the currently active tool.
|
|
ENTER
|
Accepts the changes and closes the Live Toolbar in 3D and assembly modes. Also clears the selection in the graphics window.
|
|
F1
|
Opens Help for the current context.
|
|
D
|
Toggles the visibility of dimensions in 2D mode when defining dimensions relative to specific highlighted entities.
|
|
G
|
Hides the current guide for the geometry in 2D mode.
|
|
L
|
Locks or unlocks the current guide in 2D mode.
|
|
P
|
Shows or hides temporarily the precision panels in 2D mode.
|
|
R
|
|
|
S
|
Switches between the Line and Arc Creation modes in 2D mode.
|
|
TAB
|
• Switches between the active dimensions in 2D mode.
• Prehighlights a set of surfaces on an active part using shape-selection rules based on the currently prehighlighted surface. Refer to the Creo Flexible Modeling Help for more information on shape-selection rules.
|