The moved face loses contact to a previous neighboring face. In the following example (picture 2), the cyan cylinder does not intersect with the moved planar face.
• Possible Solutions:
◦ You may need to add more faces to the move operation
◦ Make sure that the move face still has contact to the neighbor faces by extending geometry (freeform only) using an Untrim operation
Problem #2:
The move face would create a gap in the model that cannot be closed by extending neighbor faces, but would need to create additional faces.
• Possible Solution:
◦ Move the faces one after the other. For moves with a single face the necessary faces to fill the gaps can be automatically created for many cases.
◦ Use the Lift command (as shown in the picture 2) since that will insert new side faces in the model first, then move the remaining faces (pictures 3 and 4)
