Creo Elements/Direct Modeling allows you to pull the faces of a part in either a linear or angular direction. The example below shows how you can pull a face linearly by dimension.
After creating the part and the dimension:
1. Click Modeling and then, in the Modify 3D group, click the arrow next to Modify.
2. Click Pull. The Pull dialog box opens.
By default, Faces is selected in the Pull dialog box.
3. Select any one of the faces that is connected by the dimension in the viewport.
The default option in the Operation box is Automatic. Creo Elements/Direct Modeling automatically selects the most likely operation based on the other options in the Pull dialog box. You can also choose Add Material or Remove Material in the Operation box if the system suggested operation is not the wanted operation.
4. In the Type box, select Dimension.
5. Click the dimension in the viewport.
6. Drag or enter the distance in the Distance box to pull the face by dimension.
Modify.
Pull. The Pull dialog box opens.
to complete the operation.