Copy a custom process feature
You can copy both geometrical and non-geometrical custom process features, and also plastic features, associated with any object.
To copy an existing custom process feature,
1. Click Feature and then, in the Custom Feature group, click More.
2. Click
Copy in the
Modify section.
| To copy a custom process feature, you can select a feature in the viewport, right-click, and choose Copy Custom Feature from the context menu. |
3. Select the custom process feature to be copied using one of the following methods:
◦ Click the feature or its label.
◦ Click on the face which is a component of the feature to modify.
◦ Use the Structure Browser to select the feature. (Make sure that the Feat's option is switched on in the browser.)
4. Select the target element(s) to which to copy the feature using one of the following methods:
◦ For a single element, click the element directly.
◦ For multiple elements, use the Select tool.
5. Change any of the options in the available fields as required.
This also enables you to modify a feature in the Copy operation.
6. Click
to copy the custom process feature to the target element(s).
To copy a plastic feature, you can also use the Copy command in the Plastic Feature menu in the Mold Design module.
To copy a custom process feature, you can also use the Copy command in the Creo Elements/Direct Machining module.
