To Apply and Modify Ejector Pin Symbols

Creo Expert Moldbase Extension > Ejector Pins > To Apply and Modify Ejector Pin Symbols

1. Open a drawing that contains models with ejector pin cutouts.

2. Click EMX Drawing Mode >

Add drawing symbols.

3. Select a view of the model. All the ejector pin cutouts in the model are identified, and diameter-dependent symbols are added or updated.

These symbols can be modified. They are located in <installdir>/configuration/symbols_dtl/<unit>. The cutout diameter is automatically compared with the epin_symbols.cfg file setting to determine the correct symbol to use.