|
Topic
|
Description
|
|---|---|
|
Specifies the General part categories and subcategories supported by many calculation models.
|
|
|
Describes the stress parameters that may be required by the calculation model. The stresses covered include voltage, power, current, and temperature.
|
|
|
Describes the part parameters for parts supported by MIL-HDBK-217 models.
|
|
|
Describes the part parameters for parts supported by Telcordia and Bellcore models.
|
|
|
Describes the part parameters for parts supported by the HRD5 model.
|
|
|
Describes the part parameters for parts supported by FIDES models.
|
|
|
Describes the part parameters for parts supported by the IEC TR 62380 and RDF 2000 models.
|
|
|
Describes the part parameters for parts supported by 299B models.
|
|
|
Describes the part parameters for parts supported by 299C models.
|
|
|
Describes the part parameters for parts supported by 217Plus models.
|
|
|
Describes the part parameters for parts supported by the PRISM model.
|
|
|
Describes the part parameters for parts supported by the Siemens SN 29500 v1 model.
|
|
|
Describes the part parameters for parts inserted from the NPRD and EPRD Libraries.
|
|
|
Describes the part parameters for parts supported by the Mechanical model, which is based on the Handbook of Reliability Prediction Procedures for Mechanical Equipment, Document No. NSWC-98/LE1.
|
|
|
Describes the part parameters for software components when calculating failure rates using the software reliability equation from The Rome Laboratory Reliability Engineer's Toolkit, April 1993 issue, page 124-125.
|
|
|
Describes how to select a failure rate method and enter the necessary parameters for that method for a part that is user-defined.
|