Windchill Risk and Reliability Desktop Help > Appendices > LSAR File Generation > FMEA Table Formats > FMEA Mode Table BL
FMEA Mode Table BL
The following table describes the data that appears in characters 1 through 80 of the FMEA Table BL. This table is outputted one time only.
Characters
Data
Data Source
1
UPDATE CODE
Defined by the Update code field in the Generate LSAR File window. The default is blank.
2-4
TABLE DESIGNATION
Always set to BL.
5-14
END ITEM ACRONYM CODE
Defined by the End acronym code field in the Generate LSAR File window. The default is blank.
15
MISSION PHASE CODE
All the phases in the Project’s Mission Profile file are numbered sequentially, beginning with 0. After 0 through 9 are assigned, characters A through Z are assigned. After all letters and numbers are assigned, a space is used. An X is used to indicate all phases.
16-80
MISSION PHASE OPERATIONAL MODE
When the mission phase code is X, this value is set to All Phases. For a specific phase from the Mission Profile file, the Mission Phase field from the Mission Profile file is used.