Calculating FMEA Results
Calculating results for a FMEA consists of making the appropriate selections and then starting the process. Only one FMEA can be calculated at a time.
1. In the FMEA Table, select the FMEA to calculate.
2. To open the Calculate window, do one of the following:
◦ On the standard toolbar, click Calculate.
◦ Select > . The Calculate window opens.
◦ Press F8.
3. On the Calculation Selection page, select FMEA. If this checkbox is cleared, FMEA calculations do not run.
5. After entering any additional data for other calculations to perform, click OK to run the requested calculations.
The Calculation Progress window opens, displaying progress as the calculations run.
◦ When only FMEA calculations run, a window opens, indicating that the calculation is complete. In this case, click OK.
◦ If calculations for other modules are also performed, the View Calculation Results window opens so that you can view the results for these other modules. In this case, when you are finished viewing these results, click Close.
Once calculations are finished, you can view
FMEA results in the
FMEA Tree Items and
FMEA Worksheet tables. For a component
FMEA, the failure rates for items get pulled in from the system tree. For process and functional
FMEAs, the failure rates for linked items get pulled in from the system tree items or
FMEA items or modes to which they have been linked. For more information, see
Data Links.