|
In both this module and the Weibull module, you can change, reset, and save data point column names. In the above figure, the first stress column (Stress 1) is renamed Temperature. For more information, see Renaming Data Point Columns.
|
Column
|
Description
|
---|---|
Group Name
|
The unique name assigned to a set of data points. For all degradation models but Gompertz, at least two data points must exist in each group. For the Gompertz model, at least four data points must exist for each group.
|
Time
|
The time at which the degradation measurement was taken.
|
Degradation Value
|
The measured degradation value at the measurement time.
|
[stress columns]
|
The stress columns that are marked as active in the Stress Columns window. For more information, see Stress Model Window. The stress values must be the same for all units in the same group.
|
Model
|
Data Points per Group
|
Time Range
|
Degradation Range
|
---|---|---|---|
Linear
|
2 or more
|
T ≥ 0
|
D ≥ 0
|
Exponential
|
2 or more
|
T > 0
|
D > 0
|
Power
|
2 or more
|
T > 0
|
D > 0
|
Logarithmic
|
2 or more
|
T ≥ 0
|
D ≥ 0
|
Gompertz
|
3 or more
|
T > 0
|
D > 0
|
Lloyd-Lipow
|
2 or more
|
T ≥ 0
|
D ≥ 0
|