|
Parameter
|
Type
|
Description
|
|---|---|---|
|
Quality Level
|
Choice List [Parts Count also]
|
The appropriate quality screening level of the device. Accepted quality levels and values for relays follow.
• A1 = 0.15
• A2 = 0.30
• B1 = 0.50 or 0.60
• B2 = 1.00
• C = 5.00
|
|
Construction Type
|
Choice List
|
Not required for the following subcategories: Electronic Time Delay, Non-Thermal; Polarized; Solid State, Time Delay; and Thermal, Bimetal.
The construction type of the device. Choices vary by subcategory.
|
|
Contact Form
|
Choice List
|
Not required for the Solid State, Time Delay subcategory.
The number and type of active conducting contacts. Many different choices are available, including SPDT, 3PST, and more.
|
|
Max Rated Temp
|
Choice List
|
Not required for the Solid State, Time Delay subcategory.
The maximum temperature rating for the device. Choices are:
• 85
• 125
|
|
Load Type
|
Choice List
|
Not required for the Solid State, Time Delay subcategory.
The type of load connected external to the device. Choices are:
• Lamp
• Inductive
• Resistive
|
|
Cycling Rate
|
Real
|
Not required for the Solid State, Time Delay subcategory.
The average number of switching cycles per hour.
|
|
Packaging
|
Choice List
|
Required only for the Solid State, Time Delay subcategory.
The type of packaging. Choices are:
• Gasproof Package
• General Package
• Plastic and Epoxy Package
|
|
Learning Factor
|
Choice List
|
Required only for the Solid State, Time Delay subcategory.
The production level for the device. Choices are:
• Stable
• No Quality Control
• New in Production
|
|
# Output Circuit Paths
|
Integer
|
Required only for the Solid State, Time Delay subcategory.
The number of output circuit paths.
|
|
[Voltage Parameters]
|
---
|
Required only for the Solid State, Time Delay subcategory.
For more information, see Voltage Parameters.
|
|
[Current Parameters]
|
---
|
For more information, see Voltage Parameters.
|
|
Max Design Current
|
Real (Amps)
|
Required only for the Solid State, Time Delay subcategory.
The maximum rated current for the operating conditions of the design.
|
|
[Temperature Parameters]
|
---
|
Not required only for the Solid State, Time Delay subcategory.
For more information, see Basic Temperature Parameters.
|
|
[Derating Parameters]
|
---
|
For more information, see Derating Parameters.
|