Verifying FMEA Data
You use the Verify FMEA Data command to validate the construction and setup of your FMEA. This command is available when any FMEA table is active.
1. Select > . The
Verify FMEA Data window opens so that you can indicate which checks to perform. All checkboxes are selected by default. For more information, see
Verify FMEA Data Window.
2. Select the checkboxes for the checks to perform and click OK. Any previously existing FMEA warnings are deleted. The Verifying FMEA Data window indicates the progress made. If you wanted to cancel this process, you would click Stop.
After the process is complete, the status indicator reads 100% and the
FMEA Warnings window opens. For more information, see
FMEA Warnings Window.
3. When finished viewing the warnings shown in this window, click the X in the upper right corner to close it.