|
Characters
|
Data Element Title
|
Data Source
|
|---|---|---|
|
36
|
FAILURE MODE INDICATOR
|
Always set to F.
|
|
37-39
|
MODE NUMBER
|
If the Mode number field in the Generate LSAR File window is set to < Automatically generated > , the modes are numbered from 1 to n for each mode associated with an item. If a field from the FMEA Worksheet table is selected, the first three characters in this field are used. A common numbering scheme is 1A1, where:
• The first character represents the item
• The second character represents each unique failure mode for each item
• The third character represents the cause of failure for each failure mode
|
|
40
|
MISSION PHASE CODE
|
All phases in the Project’s Mission Profile file are numbered sequentially. The selection for the Mission Phase field for the mode is converted to the number of the association phase from the Mission Profile file. This number is used as the mission phase code. If no phase is selected for the Mission Phase field, then an X is used to indicate that the failure mode applies to all phases.
|
|
41
|
FAILURE MODE INDICATOR MISSION PHASE CHARACTERISTICS NARRATIVE CODE
|
Always set to A.
|
|
42-46
|
FAILURE MODE INDICATOR MISSION PHASE CHARACTERISTICS NARRATIVE TEXT SEQUENCING CODE
|
Set to a sequence number beginning with 00001 that indicates the line number of the following narrative text.
|
|
47-111
|
FAILURE MODE INDICATOR MISSION PHASE CHARACTERISTICS NARRATIVE
|
Displays the value for the Compensating Provisions field from the mode in the FMEA Worksheet table. If the field is blank or not at the mode level in the FMEA hierarchy, this table is not printed. If text is present, it is broken into multiple lines, with a maximum of 65 characters per line.
|