Option
|
Description
|
---|---|
X axis
|
Specifies the variable to plot on the x-axis.
|
Set X axis minimum
|
Indicates whether to set a minimum value for the x-axis. When this checkbox is cleared (default), no minimum value is set. When it is selected, the field to the right becomes available so that you can enter a minimum value greater than or equal to 0.
|
Set X axis maximum
|
Indicates whether to set a maximum value for the x-axis. When this checkbox is cleared (default), no maximum value is set. When it is selected, the field to the right available so that you can enter a maximum value. This value must be greater than the minimum value. If no minimum value is set, this value must be greater than 0.
|
Y axis
|
Specifies the variable to plot on the y-axis.
|
Set Y axis minimum
|
Indicates whether to set a minimum value for the y-axis. When this checkbox is cleared (default), no minimum value is set. When it is selected, the field to the right becomes available so that you can enter a minimum value greater than or equal to 0.
|
Set Y axis maximum
|
Indicates whether to set a maximum value for the y-axis. When this checkbox is cleared (default), no maximum value is set. When it is selected, the field to the right available so that you can enter a maximum value. This value must be greater than the minimum value. If no minimum value is set, this value must be greater than 0.
|
Z axis
|
Specifies the variable to plot on the z-axis when 3D Surface Plot is selected as the plot type. This option is not shown when 3D Likelihood Function is selected. Choices are Reliability, PDF, and Failure Rate.
|
Time
|
This option is shown only when 3D Surface Plot is selected as the plot type and Time is not selected as the variable to plot for either the x-axis or y-axis. In this case, you must enter the end time for the plot. The default is 100.
|