Getting Started with Windchill Risk and Reliability > Windchill LCC > Understanding LCC Calculations > Running LCC Calculations
Running LCC Calculations
To calculate LCC results:
1. Select System > Calculate, or click the calculate button on the standard toolbar. The Calculate window opens.
2. In the left pane, select the Calculation Selection page if it is not already selected.
3. In the right pane, click Clear All and then select LCC to run calculations only for the LCC module.
4. In the left pane, expand the LCC folder if necessary and select each of the pages to view the default settings. For this example, you use the default values for all pages.
5. Click OK to run the calculations. When the calculations are complete, the View Calculation Results window opens, where you can see cost and NPV results.
* 
You can print your calculation results by clicking Print in the View Calculation Results window. You can also save them to an Excel spreadsheet by clicking Excel.
6. Click Close when you have finished reviewing results.
To display the results again at any time, you would select System > View Calculation Results. If you have only one module enabled, the results shown are only for this module. If multiple modules are enabled, a navigation pane is shown so that you can select the results you want to view.