None

The element must appear once and only once. Neither optional nor repeatable.

?

The element (or group of elements) may appear zero or one time. The element is optional, but is only allowed to appear once. Optional but not repeatable.

+

The element (or group of elements) must appear one or more times. The element is required to appear at least once, but multiple consecutive occurrences may be present. Repeatable but not optional.

*

The element (or group of elements) may appear zero or more times. The element can appear as many times consecutively as needed. Repeatable and optional.

ControlData

Always provided. Contains the overall transaction data.

Part

Optional. The repeatable structure for part data.

Document

Optional. The repeatable structure for document data.

DocumentReference

Optional. Document Link structures. DocumentLinks are at the top-level of the CBO because the CBO is intended to be neutral and not specific to a particular distribution target, and there is no consistency in which object, such as part or document, owns the link from one distribution target to another.

BOM

Optional. The repeatable structure for BOM data.

ECN

Optional. The repeatable structure for ECN data.

Resource

The repeatable structure for Resource data.

Routing

The repeatable structure for process plan references data.

CBOUserArea

Optional. Stores all user-defined data used for customization.

Class

The object class value for the object being published. For example,

LastModifiedBy

Optional. Unique identifier of the last user to modify the object.

ActionFlag

The action to be performed on the object such as create, change, update, delete or unchange.

Destination

Destination contains TargetNumber and Plant from TargetId.

The TargetID of each element in ESIResponse contains values in the format of <<TargetNumber>>:<<Plant>>

For a distribution target with no plant the value of TargetID would be <<TargetNumber>>:

Where:

TargetID represents a distribution target in Windchill and Plant represents a plant in the SAP system.

ObjectID

A Windchill unique federation identifier for the object that is ready to be published.

TransactionNumber

The unique identifier for each transaction published from Windchill PDMLink.

Locale

Locale for the data published from Windchill PDMLink. The locale describes the language in which the data is in as well as the formatting for values within that language. For instance, English in the USA (EN-US) and English in England are in different locales since some of the formatting for dates and measures are different in each locale.

UserID

Unique identifier for the Windchill PDMLink user who published the data.

ESITarget

Identifies the target system ESITarget/System is mapped with, with child element destinations coming from the Release/Transaction element of ESIResponse.

For SAP the destination format is <SAPSystem ID>.<SAP Client>. For example, PR1.800.

The value of ESITarget/ERP is SAP.

ESITarget/AdapterInstanceID is the subject name pattern used for customization. For more information on the AdapterInstanceID refer to the section “How to configure a single Process archive for multiple instances” in the 《Windchill Enterprise Systems Integration Customizer's Guide - SAP R/3》.

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for part; internal to Windchill PDMLink.

Part

Unique identifier to be used as part number in the distribution target. This is the number displayed in Windchill PDMLink when the part is being looked at.

Description

Descriptive text provided with the part.

UnitOfMeasure

Units in which the part is measured. For example, liter, inches.

Type

Type of part. For example, finished good, semi-finished.

Source

Indicates if the part is bought or made internally by the business organization.

Effectivity

Values used to determine planning. Contains the following sub-elements:

StartDate: Date when the part becomes effective within the organization.

EndDate : Date when the part effectivity ends.

Version

The part version. Indicates a major change to the part. Version maps to Part/Version. If Version contains “.” then the first element before the period is considered to be the most significant and is mapped.

PreviousVersion

The part previous version. Indicates whether the same version was published before or not. This helps to determine whether to publish the version or not. If the version and previous version is same then new version will not be created. If version and previous version are not equal then version gets created in SAP. PreviousVersion maps to Part/PreviousVersion. If PreviousVersion contains “.” then the first element before the period is considered to be the most significant and is mapped.

ChangeNumber

Value for the Engineering Change Number for creating, deleting, or updating the part.

CurrentAUMs

Contains the Alternate unit of measure for the Part. For more information, see the section AUM Schema.

PartUserArea

Optional. Stores all user-defined data used for customization.

ObjectID

Unique Identifier of the Associated Object

Numerator

Numerator for the Alternate unit of measurement.

Denominator

Denominator for the Alternate unit of measurement.

Unit

Unit of measurement.

AssociatedObjectNumber

Associated Object number

AssociatedObjectType

Associated Object Type

Object Header

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the BOM; internal to Windchill PDMLink.

AssemblyPartNumber

Part number for the BOM header.

Effectivity

Values used to determine planning. Contains the following subelements:

StartDate: Date when the BOM becomes effective within the organization.

EndDate : Date when the BOM effectivity ends.

Version

Current version number of document being published.

ChangeNumber

Value for the enterprise change notice (CN) for creating, deleting, or updating the BOM.

Usage

The value is mapped using the cross referencing of BOMHeader/Usage value of ESIResponse. If the cross referenced values is blank then the value of BOMHeader/Usage in ESI Response is mapped.

Alternate

The value is mapped using cross the referencing of BOMHeader/Alternate value of ESIResponse. This value is cross referenced from ESILookups.properties. If the cross referenced values is blank then the value of BOMHeader/Alternate in ESI Response is mapped.

Children

Structure containing ChildLinks which detail the children of the BOM.

Substitutes

Structure containing SubstituteLinks which detail the substitutes of the BOM.

ReferenceDesignators

Structure containing ReferenceLinks.

BOMUserArea

Optional. Stores all user-defined data used for customization.

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the BOM children; internal to Windchill PDMLink.

ChildPartNumber

Part number for child in the distribution target.

AssemblyPartNumber

Part number for BOM header in the distribution target.

AlternateItemGroup

Value in the distribution target which is used to group children with their substitutes.

Quantity

Number of children on the BOM.

Unit

Unit of Measurement.

LineNumber

Value, which when used, allows the same part to be on multiple lines of a BOM, as long as the multiple lines have different LineNumbers.

OldLineNumber

If the element DeletedSubstitutes/substitute exists in the response then the element DeletedSubstitutes/substitute/LineNumber is mapped to OldLineNumber.

ChildLinkUserArea

Optional. Stores all user-defined data used for customization.

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the BOM children; internal to Windchill PDMLink.

ChildPartNumber

Part number for the child in the distribution target.

AssemblyPartNumber

Part number for the BOM header in the distribution target.

SubstitutePartNumber

Part number for the substitute in the distribution target.

AlternateItemGroup

The value in the distribution target used to group children with their substitutes.

Quantity

Number of children on the BOM.

LineNumber

The value, when used, allows the same part to be on multiple lines of a BOM as long as the multiple lines have different LineNumbers.

OldLineNumber

If the element DeletedSubstitutes/substitute exists in the response then the element DeletedSubstitutes/substitute/LineNumber is mapped to OldLineNumber.

SubstituteLinkUserArea

Optional. Stores all user-defined data used for customization.

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the CN; internal to Windchill PDMLink.

ChangeNumber

The CN identifier in the distribution target.

Description

Text describing the change.

ReasonForChange

Text describing the reason for the change.

ECNUserArea

Optional. Stores all user-defined data used for customization.

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the alternate part; internal to Windchill PDMLink.

DocumentNumber

The document number displayed in Windchill PDMLink and the unique ID number for the distribution target.

Type

The type of document. For example, techDesign.

Name

Text to appear as name of the document instead of a weblink or file name.

File

File location; usually a web address.

Version

Current version number of document being published.

PreviousVersion

Previous version number of document being published.

Effectivity

Values used to determine planning. Contains the following subelements:

StartDate: Date when the document becomes effective within the organization.

EndDate : Date when the document effectivity ends.

ChangeNumber

Value for the engineer change notice (CN) for creating, deleting, or updating the document.

DocumentUserArea

Optional. Stores all user-defined data used for customization.

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the document link; internal to Windchill PDMLink.

AssociatedObjectNumber

The number for the business object in the distribution target to which the document is being linked.

AssociatedObjectClass

The class of the business object in the distribution target to which the document is being linked.

DocumentNumber

Identifier for the document in the distribution target.

DocumentVersion

Version for the document in the distribution target.

DocumentLinkUserArea

Optional. Stores all user-defined data used for customization.

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the Process Plans; internal to Windchill MPMLink.

Version

Process Plan (Routing in SAP) revision. Does not map in SAP.

ProcessPlanNumber

Process Plan Number. Maps to Group Number of Routing in SAP.

GroupCounter

In SAP to duplicate a group number you must have a unique group counter. For example for each plant group the numbers will be the same. TIBCO generates a unique group counter for each plant so that Windchill MPMLink process plans can be published to more than one plant.

ChangeNumber

Value for the enterprise change notice (CN) for creating or updating the Process Plan.

IsStandard

By default set to false. If set to true then becomes a Standard Process Plan that can be referred to from other Process Plan.

ComponentAllocation

The operation's BOM allocated part. Maps to component allocation inside the operation.

MaterialTaskAllocation

Contains the Process plan and its' Part allocation link details.

Operations

Contains the operations of a process plan. This operation contains sequence operations or operations in a standard sequence.

ProducResources

Contains details about the associations between Operations in a Process Plan and the associated consumable resources in a Process Plan.

Sequences

Contains the sequences in a process plan.

SubOperations

Contains SubOperation for the operation in a Process plan.

Tasks

Contains Process Plan header information.

RoutingUserArea

Optional. Stores all user-defined data used in customizations.

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the Process Plan; Internal to Windchill MPMLink.

ValidFrom

Process Plan's (Routing in SAP) start effective date. In SAP it goes to alternate date's valid from date in ECN and Routing object gets assigned this Alternate date in ECN.

ValidToDate

Process plan's end effectivity date. Not mapped in SAP.

TaskListUsage

In SAP it is must to have Task List usage for Routing. It is cross-referenced from ESILookups.properties based on Process Plan category.

TaskListStatus

In SAP it is must to have Task List status for Routing. It is defaulted from ESIDefaults.properties.

TaskMeasureUnit

Process plan's base unit of measure.

LotSizeFrom

Process Plan From lot size

Description

Description of the process plan

RoutingTaskUserArea

Optional. Stores all user-defined data used in customizations.

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the Process Plan Sequence; Internal to Windchill MPMLink.

SequenceNumber

Sequence line number defined on the sequence. It maps to Sequence Number in SAP.

WNC_Sequence

Sequence Number in Windchill Process plan. Does not map in SAP. Here it is taken for filter purpose.

ValidFrom

Sequence Start Effectivity date. Does not map in SAP. Note: Process Plan's (Routing in SAP) start effective date. In SAP it goes to alternate date's valid from date in ECN and Routing object gets assigned this Alternate date in ECN.

ValidToDate

Sequences’s end effectivity. It does not map in SAP.

SequenceCategory

Category of Sequence. Cross references from ESILookups.properties based on the category of sequence in Windchill Process plan. It decides whether to have alternate or parallel sequence.

ReferenceSequence

Defaulted from ESIDefaults.properties. It is always "000000".

Description

Sequence name.

TaskMeasureUnit

Cross referenced from ESILookups.properties for Unit of measurement of sequence in Windchill Process Plan.

BranchOperation

Branching operation defined for the sequence

ReturnOperation

Return Operation defined for the sequence

RoutingSequenceUserArea

Optional. Stores all user-defined data used in customizations.

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the Process Plan; Internal to Windchill MPMLink.

Material

Material number.

Usage

BOM usage of the Assembly of the component.

Alternate

BOM alternate of the Assembly of the component.

RoutingComponentAllocationUserArea

Optional. Stores all user-defined data used for customization.

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the Process Plan Operation; Internal to Windchill MPMLink.

SequenceNo

Sequence line number defined for the sequence of Process plan. In SAP it maps to sequence number of the Routing sequence. For the operation of standard sequence it is defaulted to "000000"

HolderNo

Process plan number for operation in standard sequence. Sequence number for operation in sequence. Operation number for sub operation. For internal filter purpose.

Category

To determine whether this is operation in standard sequence or sub operation or sequence operation. For internal filter purpose.

Activity

Operation label of the Operation. In SAP it maps to Operation/Activity

OldActivity

Old Operation label of the Operation. Used to identify the operation label change.

OperationId

Unique identifier for the Operation, that is operation number. Internal to Windchill MPMLink. In CBO it maps for internal filtering purposes.

ControlKey

ERP Validation code. Cross referenced in ESILookups.properties file based on ERPValidation code in Operation.

WorkCntr

Work center value specified for the work center associated with the Operation.

Plant

Plant of the associated work-center or process plan.

Description

Description of the Operation

OperationMeasureUnit

Cross-reference for Operation unit of measure.

Denominator

1

Nominator

1

BaseQuantity

Quantity mentioned in operation.

StdValue01

Set upTime defined on the operation

StdUnit01

Unit of measure of SetupTime defined on the operation

StdValue02

ProcessingTime defined on the Operation.

StdUnit02

Unit of measure of ProcessingTime defined on the Operation

StdValue03

LaborTime defined on the operation

StdUnit03

Unit of Measure LaborTime defined on the operation

MaxWaitTime

WaitingTime defined on the operation

MaxWaitTime Unit

Unit of WaitingTime defined on the operation

StandardQueue Time

QueueTime defined on the operation

StandardQueue TimeUnit

QueueTime defined on the operation

StandardMove Time

MoveTime defined on the operation

StandardMove TimeUnit

Unit of MoveTime defined on the operation

RoutingOperationUserArea

Optional. Stores all user-defined data used in customizations.

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the Process Plan Sub Operation; Internal to Windchill MPMLink.

SequenceNo

Sequence Line Number of the Sequence. Under which the operation and it's sub operation is defined.

HolderNo

Parent Operation Number for which the Sub operation defined.

ValidFrom

Sub-operation Start Effectivity date. It does not map to SAP. Note: Process Plan's (Routing in SAP) start effective date. In SAP it goes to alternate date's valid from date in ECN and Routing object gets assigned this Alternate date in ECN.

ValidToDate

Process plan's end effectivity date. Not mapped in SAP.

SubActivity

Operation label of the sub operation. It maps to SubOperation/Activity of suboperation in SAP Routing.

SubOperationId

Unique identifier for the Sub Operation, that is sub operation number. Internal to Windchill MPMLink. In CBO it maps for internal filter purpose.

Activity

Parent Operation's Operation Label which maps to Operation/Activity of the Sub operation in SAP Routing.

OperationId

Unique identifier for the Parent Operation of sub operation, that is operation number. Internal to Windchill MPMLink. In CBO it maps for internal filter purpose.

ControlKey

ERP Validation code. Cross referenced in ESILookups.properties file based on ERPValidation code in sub Operation.

WorkCntr

Work center value specified for the work center associated with the sub Operation.

Plant

Plant of the associated work-center or process plan.

Description

Description of the sub Operation

OperationMeasureUnit

Cross-reference for sub Operation unit of measure.

Denominator

1

Nominator

1

BaseQuantity

Quantity mentioned in operation.

StdValue01

Set upTime defined on the operation

StdUnit01

Unit of measure of SetupTime defined on the operation

StdValue02

ProcessingTime defined on the Operation.

StdUnit02

Unit of measure of ProcessingTime defined on the Operation

StdValue03

LaborTime defined on the operation

StdUnit03

Unit of Measure LaborTime defined on the operation

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the Process Plan Consumable Resource like Process Material, Tooling, document; Internal to Windchill MPMLink.

ChangeNumber

Value for the enterprise change notice (CN) for creating, updating the Process Plan.

SequenceNumber

Sequence line number of the associated Operation's sequence. In case of operation is from standard sequence it is "000000"

ValidFrom

Production Resource Start Effectivity date. It does not map to SAP. Note: Process Plan's (Routing in SAP) start effective date. In SAP it goes to alternate date's valid from date in ECN and Routing object gets assigned this Alternate date in ECN.

ValidToDate

Process plan's end effectivity date. Not mapped in SAP.

Activity

Associated operation's operation label

OperationId

Associated Operation number. Does not map to SAP. Internal filter purpose.

ItemNoOfProductionResource

Allocation number in case of consumable resources allocation.

CtrlKey

Default value for Resource allocation from ESIDefaults.properties file.

StdValueForPrtQty

Associated operation's quantity attribute.

Description

Resource number in case of consumable resources.

PrtCategory

It is decided based on type and category of associated consumable resource to operation. Cross referenced from ESILookups.properties based on type and category. In case of Document/work instructions associated to operation, PrtCategory becomes 'D'.

PrtPlant

Process plan Plant

Material

In case of Process Material as consumable resource then Resource number becomes Material.

DocumentType

In case of Document/work instructions associated to operation, it is document type from document link. It gets cross referenced from ESILookup.prioperties

DocumentNumber

In case of Document/work instructions associated to operation, it is document number from document.

DocumentPart

Cross referenced from ESILookups.properties in case of document/work instructions associated with operation.

DocumentVersion

In case of Document/work instructions associated to operation, it is document number from document.

Equipment

Checks using Cross referenced based on the category of associated consumable resource if it is equipment then Resource number maps to equipment.

RoutingProductionResourceUserArea

Optional. Stores all user-defined data used in customizations.

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the Process Plan OprBomAllocatedParts link; Internal to Windchill MPMLink.

ChangeNumber

Same as BOM schema

TaskListGroup

Process plan number. TaskListGroup is group the group number in SAP.

GroupCounter

In SAP to duplicate a group number you must have a unique group counter. For example for each plant group the numbers will be the same. TIBCO generates a unique group counter for each plant so that Windchill MPMLink process plans can be published to more than one process plan.

SequenceNo

Associated operation's sequence line number.

ValidFrom

Process Plan's (Routing in SAP) start effective date. In SAP it goes to alternate date's valid from date in ECN and Routing object gets assigned this Alternate date in ECN.

ValidToDate

Process plan's end effectivity date. Not mapped in SAP.

Activity

Associated Operation's Operation Label.

OperationID

Associated Operation's Operation number. Internal to Windchill. Here it is used for filtering purposes.

BomType

BOM type of the BOM header. BOM header will be considered the Material, which is associated to the process plan.

CompOty

Associated component quantity

CompUnit

Associated component unit of measure

Plant

Process Plan Plant

Material

Component number

RoutingComponentAllocationUserArea

"Optional. Stores all user-defined data used in customizations.

ObjectHeader

The system information for the current object. For more information, see Common Business Object Schema: Object Header.

WCID

Unique identifier for the Resource; Internal to Windchill MPMLink.

ResourceNumber

Resource Number maps to Material Number of type PRT or Equipment Number of Equipment.

ResourceType

Type of Resource. For example, material or equipment.

CategoryType

Category of Resource. Based on the category that is obtained from the file ESILookups.properties by cross referencing, the resource is published to SAP either as a PRT material or as an equipment. Out of the box, if the value fetched for category is Tool, the resource is published as a PRT material; if the value is Fixture, it is published as an equipment.

Description

Name of resource.

UnitOfMeasure

Default Unit of Resource.

Source

Source of Resource. It maps to SAP as PROC_TYPE. It gets cross referenced from ESILookups.properties based on Source value of Resource.

Effectivity

Values used to determine planning. Contains the following sub-elements:

StartDate

Date when the part becomes effective within the organization.

EndDate

Date when the part effectivity ends.

Does not map in SAP.

Version

Version of Process Material. It maps to the revision level of Material in SAP.

ChangeNumber

Value for the Engineering Change Number for creating, deleting, or updating the part.

Alternates

Contains data on alternate Resource, which can be used if the current resource is out of stock.

CurrentAUM

Contains the Alternate unit of measure for the resource. See Current AUM schema for details.

ResourceUserArea

Optional. Stores all user-defined data used in customizations.