Exporting a Package Example
In this example, a Creo Packages design partner wants to export a package containing Creo Parametric data of a complete bike assembly to another design partner or supplier for the purpose of sharing component information about the bike.
The design partner or supplier on the source PLM system exports the package using the default configuration option for the Creo Parametric data, names the package, and specifies the seed name.
WPCExport -u talva -p ptc -n crankset_asm_1800.asm -g 1102_1800_01
The following table contains essential arguments for this example WPCExport command:
Command Name
Argument
Description
WPCExport
-u
Use to specify the username.
-p
Use to specify the password. For increased security, you can choose to not include the password. The system prompts you for the password and mask the password characters that you enter.
-n
Use to specify the seed name.
-g
Use to specify the package name.
The successfully exported package containing the Creo Parametric model files and the associated metadata are available on the client machine for viewing and file transfer to the target PLM system.
Before sending the package to the target PLM system partner or supplier, review the Export and Export Post Reports.
Review the Export Report
The Export Report contains detailed information concerning export conditions, preferences, if any recipe files were used to export the package, and the export summary of the package. For example:
+++++++++++++++++++++++++++++++++++++++++++++++++
Export report
PTC Windchill 10.2 PLM Connector - Creo Packages
Start date: Nov 2, 2007 10:16:16 PM
Package name: talva
+++++++++++++++++++++++++++++++++++++++++++++++++
Export conditions
+++++++++++++++++++++++++++++++++++++++++++++++++
Export preferences: c:\ptc\ilink03_SiteA\wpc_preferences.txt
+++++++++++++++++++++++++++++++++++++++++++++++++
Export recipe
+++++++++++++++++++++++++++++++++++++++++++++++++
seed
crankset_asm_1800.asm
+++++++++++++++++++++++++++++++++++++++++++++++++
Export summary
+++++++++++++++++++++++++++++++++++++++++++++++++
Objects exported: 148
Objects expected in the target system: 0
Reference information included: 0
Baseline created:/ptc/Library/mig_test//Assembly/WPC_export
_talva _20071102_221618
+++++++++++++++++++++++++++++++++++++++++++++++++
End date: Nov 2, 2007 10:18:07 PM
Export status: Completed successfully
Review the Export Post Report
The export post report contains the Creo Parametric assemblies and components with various actions and revision values. The report might contain information concerning file names, owner revisions, owner iterations, owner life cycle, owner life cycle state, and owner location.
For example:
General Report
Owner system information
Objects exported (3)
File Name
Owner Revision
Owner Iteration
Owner Lifecycle
Owner Lifecycle State
Owner Location
s.drw
A
1
Basic
INWORK
/ptc/Library/mig_test//test1
s.asm
A
1
Basic
INWORK
/ptc/Library/mig_test//test1
s.prt
A
1
Basic
INWORK
/ptc/Library/mig_test//test1
Local system information
Objects exported (3)
File Name
Local Revision
Local Iteration
Local Lifecycle
Local Life-cycle State
Local Location
s.drw
A
1
Basic
INWORK
/ptc/Library/mig_test//test1
s.asm
A
1
Basic
INWORK
/ptc/Library/mig_test//test1
s.prt
A
1
Basic
INWORK
/ptc/Library/mig_test//test1
Send the Package to Target PLM Systems
The exported package can now be sent to another design partner or supplier for the sharing of component information on a target PLM system. Depending on the collaboration procedures you have established between the source and target system partners or suppliers, the package can be transferred using several mediums, including email, file transfer protocol (FTP), CD-ROM, or tape.
Isto foi útil?