The <PartAction> Element
The <PartAction> element is defined as:
• Having up to three elements used to filter and select your CAD Documents. These elements are the FolderSpec, the PISpec, and the PIVSpec.
• Having at least one element or a combination of several elements. You cannot use any single element more than once in the <PartAction> element.
• A tag defining whether the system creates or does not create a part for the CAD documents.
• A tag specifying s which class of WTPart to create from the selected CAD Documents
|
Attribute
|
Definition and Usage
|
||
|---|---|---|---|
|
Create
|
This attribute specifies whether the part creation tool creates a WTPart for the CAD Documents selected by the <PartAction> element.
Values:
• True (default)
• False
|
||
|
Class
|
This attribute determines the type of WTPart created for the CAD Documents. This is a required attribute. This attribute is used with the End Item attribute.
Value:
• wt.part.WTPart
|
||
|
End Item
|
This attribute specifies whether WTPart for the CAD documents have an EndItem selected by the <PartAction> element.
Values:
• True
• False (default)
|
Usage Example
The <PartAction> element criteria creates WTParts of the class “wt.part.WTPart” for CAD Documents. For example,
<specifier>
<PartAction Class="wt.part.WTPart">
.
.
</PartAction>
</specifier>
<PartAction Class="wt.part.WTPart">
.
.
</PartAction>
</specifier>
The <PartAction> element criteria does not create WTParts of the class “wt.part.WTPart” for CAD Documents. For example,
<specifier>
<PartAction Create="False">
.
.
</PartAction>
</specifier>
<PartAction Create="False">
.
.
</PartAction>
</specifier>