엔터프라이즈 관리 > Windchill ESI 구현 > Implementing Windchill ESI in an SAP Environment > XML Schemas
  
XML Schemas
This section provides details on the followingWindchill ESI XML schemas:
Common Business Object (CBO)
ESILog
ESIError
ESIResultService
ESIJMSCustomProperties
In the following sections, illustrations of the schemas include occurrence indicators (displayed in circles) to specify how many times an element may appear at a given location. Refer to the following table for the indicators and their descriptions when reviewing the XML schemas.
Occurrence Indicator
Description
None
The element must appear once and only once. Neither optional nor repeatable.
?
The element (or group of elements) may appear zero or one time. The element is optional, but is only allowed to appear once. Optional but not repeatable.
+
The element (or group of elements) must appear one or more times. The element is required to appear at least once, but multiple consecutive occurrences may be present. Repeatable but not optional.
*
The element (or group of elements) may appear zero or more times. The element can appear as many times consecutively as needed. Repeatable and optional.
Common Business Object (CBO)
The following describes the different parts of the CBO schema which, as mentioned earlier, is the data model adopted by the Windchill ESI business logic to represent the data for each object published from Windchill PDMLink.
Common Business Object Schema: Top Level
The following describes the elements contained in the CBO schema:
Element
Description
ControlData
Always provided. Contains the overall transaction data.
Part
Optional. The repeatable structure for part data.
Document
Optional. The repeatable structure for document data.
DocumentReference
Optional. Document Link structures. DocumentLinks are at the top-level of the CBO because the CBO is intended to be neutral and not specific to a particular distribution target, and there is no consistency in which object, such as part or document, owns the link from one distribution target to another.
BOM
Optional. The repeatable structure for BOM data.
ECN
Optional. The repeatable structure for ECN data.
Resource
The repeatable structure for Resource data.
Routing
The repeatable structure for process plan references data.
CBOUserArea
Optional. Stores all user-defined data used for customization.
Common Business Object Schema: Object Header
The following describes the elements contained in the Object Header schema:
Element
Description
Class
The object class value for the object being published. For example,
com.ptc.windchill.esi.Part
LastModifiedBy
Optional. Unique identifier of the last user to modify the object.
ActionFlag
The action to be performed on the object such as create, change, update, delete or unchange.
Destination
Destination contains TargetNumber and Plant from TargetId.
The TargetID of each element in ESIResponse contains values in the format of <<TargetNumber>>:<<Plant>>
For a distribution target with no plant the value of TargetID would be <<TargetNumber>>:
Where:
TargetID represents a distribution target in Windchill and Plant represents a plant in the SAP system.
Control Data Schema
The following describes the elements contained in the Control Data schema:
Element
Description
ObjectID
A Windchill unique federation identifier for the object that is ready to be published.
TransactionNumber
The unique identifier for each transaction published from Windchill PDMLink.
Locale
Locale for the data published from Windchill PDMLink. The locale describes the language in which the data is in as well as the formatting for values within that language. For instance, English in the USA (EN-US) and English in England are in different locales since some of the formatting for dates and measures are different in each locale.
UserID
Unique identifier for the Windchill PDMLink user who published the data.
ESITarget
Identifies the target system ESITarget/System is mapped with, with child element destinations coming from the Release/Transaction element of ESIResponse.
For SAP the destination format is <SAPSystem ID>.<SAP Client>. For example, PR1.800.
The value of ESITarget/ERP is SAP.
ESITarget/AdapterInstanceID is the subject name pattern used for customization. For more information on the AdapterInstanceID refer to the section “How to configure a single Process archive for multiple instances” in the Windchill Enterprise Systems Integration Customizer's Guide - SAP(Windchill Enterprise Systems Integration 사용자정의 안내서 - SAP).
Part Schema
The following describes the elements contained in the part schema.
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for part; internal to Windchill PDMLink.
Part
Unique identifier to be used as part number in the distribution target. This is the number displayed in Windchill PDMLink when the part is being looked at.
Description
Descriptive text provided with the part.
UnitOfMeasure
Units in which the part is measured. For example, liter, inches.
Type
Type of part. For example, finished good, semi-finished.
Source
Indicates if the part is bought or made internally by the business organization.
Effectivity
Values used to determine planning. Contains the following sub-elements:
StartDate: Date when the part becomes effective within the organization.
EndDate : Date when the part effectivity ends.
Version
The part version. Indicates a major change to the part. Version maps to Part/Version. If Version contains “.” then the first element before the period is considered to be the most significant and is mapped.
PreviousVersion
The part previous version. Indicates whether the same version was published before or not. This helps to determine whether to publish the version or not. If the version and previous version is same then new version will not be created. If version and previous version are not equal then version gets created in SAP. PreviousVersion maps to Part/PreviousVersion. If PreviousVersion contains “.” then the first element before the period is considered to be the most significant and is mapped.
ChangeNumber
Value for the Engineering Change Number for creating, deleting, or updating the part.
CurrentAUMs
Contains the Alternate unit of measure for the Part. For more information, see the section AUM Schema.
PartUserArea
Optional. Stores all user-defined data used for customization.
AUM Schema
The following describes the elements contained in the AUM schema.
Element
Description
ObjectID
Unique Identifier of the Associated Object
Numerator
Numerator for the Alternate unit of measurement.
Denominator
Denominator for the Alternate unit of measurement.
Unit
Unit of measurement.
AssociatedObjectNumber
Associated Object number
AssociatedObjectType
Associated Object Type
BOM Schema
The following describes the elements contained in the BOM schema.
Element
Description
Object Header
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the BOM; internal to Windchill PDMLink.
AssemblyPartNumber
Part number for the BOM header.
Effectivity
Values used to determine planning. Contains the following subelements:
StartDate: Date when the BOM becomes effective within the organization.
EndDate : Date when the BOM effectivity ends.
Version
Current version number of document being published.
ChangeNumber
Value for the enterprise change notice (CN) for creating, deleting, or updating the BOM.
Usage
The value is mapped using the cross referencing of BOMHeader/Usage value of ESIResponse. If the cross referenced values is blank then the value of BOMHeader/Usage in ESI Response is mapped.
Alternate
The value is mapped using cross the referencing of BOMHeader/Alternate value of ESIResponse. This value is cross referenced from ESILookups.properties. If the cross referenced values is blank then the value of BOMHeader/Alternate in ESI Response is mapped.
Children
Structure containing ChildLinks which detail the children of the BOM.
Substitutes
Structure containing SubstituteLinks which detail the substitutes of the BOM.
ReferenceDesignators
Structure containing ReferenceLinks.
BOMUserArea
Optional. Stores all user-defined data used for customization.
BOM Children Schema
The following describes the elements contained in the BOM children schema.
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the BOM children; internal to Windchill PDMLink.
ChildPartNumber
Part number for child in the distribution target.
AssemblyPartNumber
Part number for BOM header in the distribution target.
AlternateItemGroup
Value in the distribution target which is used to group children with their substitutes.
Quantity
Number of children on the BOM.
Unit
Unit of Measurement.
LineNumber
Value, which when used, allows the same part to be on multiple lines of a BOM, as long as the multiple lines have different LineNumbers.
OldLineNumber
If the element DeletedSubstitutes/substitute exists in the response then the element DeletedSubstitutes/substitute/LineNumber is mapped to OldLineNumber.
ChildLinkUserArea
Optional. Stores all user-defined data used for customization.
BOM Substitute Schema
The following describes the elements contained in the substitute on a BOM schema.
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the BOM children; internal to Windchill PDMLink.
ChildPartNumber
Part number for the child in the distribution target.
AssemblyPartNumber
Part number for the BOM header in the distribution target.
SubstitutePartNumber
Part number for the substitute in the distribution target.
AlternateItemGroup
The value in the distribution target used to group children with their substitutes.
Quantity
Number of children on the BOM.
LineNumber
The value, when used, allows the same part to be on multiple lines of a BOM as long as the multiple lines have different LineNumbers.
OldLineNumber
If the element DeletedSubstitutes/substitute exists in the response then the element DeletedSubstitutes/substitute/LineNumber is mapped to OldLineNumber.
SubstituteLinkUserArea
Optional. Stores all user-defined data used for customization.
Reference Designator on a BOM Schema
Reference designators are not mapped in the default version of SAP.
CN Schema
The following describes the elements contained in the CN schema.
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the CN; internal to Windchill PDMLink.
ChangeNumber
The CN identifier in the distribution target.
Description
Text describing the change.
ReasonForChange
Text describing the reason for the change.
ECNUserArea
Optional. Stores all user-defined data used for customization.
Document Schema
The following describes the elements contained in the document schema.
* 
As delivered, standard Windchill ESI does not support the publication of documents from Windchill PDMLink to Oracle Applications and does not map the Document portion of the CBO to Oracle Applications.
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the alternate part; internal to Windchill PDMLink.
DocumentNumber
The document number displayed in Windchill PDMLink and the unique ID number for the distribution target.
Type
The type of document. For example, techDesign.
Name
Text to appear as name of the document instead of a weblink or file name.
File
File location; usually a web address.
Version
Current version number of document being published.
PreviousVersion
Previous version number of document being published.
Effectivity
Values used to determine planning. Contains the following subelements:
StartDate: Date when the document becomes effective within the organization.
EndDate : Date when the document effectivity ends.
ChangeNumber
Value for the engineer change notice (CN) for creating, deleting, or updating the document.
DocumentUserArea
Optional. Stores all user-defined data used for customization.
Document Link Schema
The following describes the elements contained in the document link schema.
* 
As delivered, standard Windchill ESI does not support the publication of documents from Windchill PDMLink to Oracle Applications and does not map the Document portion of the CBO to Oracle Applications.
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the document link; internal to Windchill PDMLink.
AssociatedObjectNumber
The number for the business object in the distribution target to which the document is being linked.
AssociatedObjectClass
The class of the business object in the distribution target to which the document is being linked.
DocumentNumber
Identifier for the document in the distribution target.
DocumentVersion
Version for the document in the distribution target.
DocumentLinkUserArea
Optional. Stores all user-defined data used for customization.
Routing Schema
The following describes the elements contained in the Routing schema.
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the Process Plans; internal to Windchill MPMLink.
Version
Process Plan (Routing in SAP) revision. Does not map in SAP.
ProcessPlanNumber
Process Plan Number. Maps to Group Number of Routing in SAP.
GroupCounter
In SAP to duplicate a group number you must have a unique group counter. For example for each plant group the numbers will be the same. TIBCO generates a unique group counter for each plant so that Windchill MPMLink process plans can be published to more than one plant.
ChangeNumber
Value for the enterprise change notice (CN) for creating or updating the Process Plan.
IsStandard
By default set to false. If set to true then becomes a Standard Process Plan that can be referred to from other Process Plan.
ComponentAllocation
The operation's BOM allocated part. Maps to component allocation inside the operation.
MaterialTaskAllocation
Contains the Process plan and its' Part allocation link details.
Operations
Contains the operations of a process plan. This operation contains sequence operations or operations in a standard sequence.
ProducResources
Contains details about the associations between Operations in a Process Plan and the associated consumable resources in a Process Plan.
Sequences
Contains the sequences in a process plan.
SubOperations
Contains SubOperation for the operation in a Process plan.
Tasks
Contains Process Plan header information.
RoutingUserArea
Optional. Stores all user-defined data used in customizations.
Routing/Task Schema
The following describes the elements contained in the Routing /Task schema.
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the Process Plan; Internal to Windchill MPMLink.
ValidFrom
Process Plan's (Routing in SAP) start effective date. In SAP it goes to alternate date's valid from date in ECN and Routing object gets assigned this Alternate date in ECN.
ValidToDate
Process plan's end effectivity date. Not mapped in SAP.
TaskListUsage
In SAP it is must to have Task List usage for Routing. It is cross-referenced from ESILookups.properties based on Process Plan category.
TaskListStatus
In SAP it is must to have Task List status for Routing. It is defaulted from ESIDefaults.properties.
TaskMeasureUnit
Process plan's base unit of measure.
LotSizeFrom
Process Plan From lot size
Description
Description of the process plan
RoutingTaskUserArea
Optional. Stores all user-defined data used in customizations.
Routing Sequences Schema
The following describes the elements contained in the sequences schema.
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the Process Plan Sequence; Internal to Windchill MPMLink.
SequenceNumber
Sequence line number defined on the sequence. It maps to Sequence Number in SAP.
WNC_Sequence
Sequence Number in Windchill Process plan. Does not map in SAP. Here it is taken for filter purpose.
ValidFrom
Sequence Start Effectivity date. Does not map in SAP. Note: Process Plan's (Routing in SAP) start effective date. In SAP it goes to alternate date's valid from date in ECN and Routing object gets assigned this Alternate date in ECN.
ValidToDate
Sequences’s end effectivity. It does not map in SAP.
SequenceCategory
Category of Sequence. Cross references from ESILookups.properties based on the category of sequence in Windchill Process plan. It decides whether to have alternate or parallel sequence.
ReferenceSequence
Defaulted from ESIDefaults.properties. It is always "000000".
Description
Sequence name.
TaskMeasureUnit
Cross referenced from ESILookups.properties for Unit of measurement of sequence in Windchill Process Plan.
BranchOperation
Branching operation defined for the sequence
ReturnOperation
Return Operation defined for the sequence
RoutingSequenceUserArea
Optional. Stores all user-defined data used in customizations.
Routing Material Task Allocation
The following describes the elements contained in the resource schema.
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the Process Plan; Internal to Windchill MPMLink.
Material
Material number.
Usage
BOM usage of the Assembly of the component.
Alternate
BOM alternate of the Assembly of the component.
RoutingComponentAllocationUserArea
Optional. Stores all user-defined data used for customization.
Routing Operation Schema
The following describes the elements contained in the operation schema.
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the Process Plan Operation; Internal to Windchill MPMLink.
SequenceNo
Sequence line number defined for the sequence of Process plan. In SAP it maps to sequence number of the Routing sequence. For the operation of standard sequence it is defaulted to "000000"
HolderNo
Process plan number for operation in standard sequence. Sequence number for operation in sequence. Operation number for sub operation. For internal filter purpose.
Category
To determine whether this is operation in standard sequence or sub operation or sequence operation. For internal filter purpose.
Activity
Operation label of the Operation. In SAP it maps to Operation/Activity
OldActivity
Old Operation label of the Operation. Used to identify the operation label change.
OperationId
Unique identifier for the Operation, that is operation number. Internal to Windchill MPMLink. In CBO it maps for internal filtering purposes.
ControlKey
ERP Validation code. Cross referenced in ESILookups.properties file based on ERPValidation code in Operation.
WorkCntr
Work center value specified for the work center associated with the Operation.
Plant
Plant of the associated work-center or process plan.
Description
Description of the Operation
OperationMeasureUnit
Cross-reference for Operation unit of measure.
Denominator
1
Nominator
1
BaseQuantity
Quantity mentioned in operation.
StdValue01
Set upTime defined on the operation
StdUnit01
Unit of measure of SetupTime defined on the operation
StdValue02
ProcessingTime defined on the Operation.
StdUnit02
Unit of measure of ProcessingTime defined on the Operation
StdValue03
LaborTime defined on the operation
StdUnit03
Unit of Measure LaborTime defined on the operation
MaxWaitTime
WaitingTime defined on the operation
MaxWaitTime Unit
Unit of WaitingTime defined on the operation
StandardQueue Time
QueueTime defined on the operation
StandardQueue TimeUnit
QueueTime defined on the operation
StandardMove Time
MoveTime defined on the operation
StandardMove TimeUnit
Unit of MoveTime defined on the operation
RoutingOperationUserArea
Optional. Stores all user-defined data used in customizations.
Sub Operations Schema
The following describes the elements contained in the resource schema.
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the Process Plan Sub Operation; Internal to Windchill MPMLink.
SequenceNo
Sequence Line Number of the Sequence. Under which the operation and it's sub operation is defined.
HolderNo
Parent Operation Number for which the Sub operation defined.
ValidFrom
Sub-operation Start Effectivity date. It does not map to SAP. Note: Process Plan's (Routing in SAP) start effective date. In SAP it goes to alternate date's valid from date in ECN and Routing object gets assigned this Alternate date in ECN.
ValidToDate
Process plan's end effectivity date. Not mapped in SAP.
SubActivity
Operation label of the sub operation. It maps to SubOperation/Activity of suboperation in SAP Routing.
SubOperationId
Unique identifier for the Sub Operation, that is sub operation number. Internal to Windchill MPMLink. In CBO it maps for internal filter purpose.
Activity
Parent Operation's Operation Label which maps to Operation/Activity of the Sub operation in SAP Routing.
OperationId
Unique identifier for the Parent Operation of sub operation, that is operation number. Internal to Windchill MPMLink. In CBO it maps for internal filter purpose.
ControlKey
ERP Validation code. Cross referenced in ESILookups.properties file based on ERPValidation code in sub Operation.
WorkCntr
Work center value specified for the work center associated with the sub Operation.
Plant
Plant of the associated work-center or process plan.
Description
Description of the sub Operation
OperationMeasureUnit
Cross-reference for sub Operation unit of measure.
Denominator
1
Nominator
1
BaseQuantity
Quantity mentioned in operation.
StdValue01
Set upTime defined on the operation
StdUnit01
Unit of measure of SetupTime defined on the operation
StdValue02
ProcessingTime defined on the Operation.
StdUnit02
Unit of measure of ProcessingTime defined on the Operation
StdValue03
LaborTime defined on the operation
StdUnit03
Unit of Measure LaborTime defined on the operation
Routing Product Resources Schema
The following describes the elements contained in the resource schema.
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the Process Plan Consumable Resource like Process Material, Tooling, document; Internal to Windchill MPMLink.
ChangeNumber
Value for the enterprise change notice (CN) for creating, updating the Process Plan.
SequenceNumber
Sequence line number of the associated Operation's sequence. In case of operation is from standard sequence it is "000000"
ValidFrom
Production Resource Start Effectivity date. It does not map to SAP. Note: Process Plan's (Routing in SAP) start effective date. In SAP it goes to alternate date's valid from date in ECN and Routing object gets assigned this Alternate date in ECN.
ValidToDate
Process plan's end effectivity date. Not mapped in SAP.
Activity
Associated operation's operation label
OperationId
Associated Operation number. Does not map to SAP. Internal filter purpose.
ItemNoOfProductionResource
Allocation number in case of consumable resources allocation.
CtrlKey
Default value for Resource allocation from ESIDefaults.properties file.
StdValueForPrtQty
Associated operation's quantity attribute.
Description
Resource number in case of consumable resources.
PrtCategory
It is decided based on type and category of associated consumable resource to operation. Cross referenced from ESILookups.properties based on type and category. In case of Document/work instructions associated to operation, PrtCategory becomes 'D'.
PrtPlant
Process plan Plant
Material
In case of Process Material as consumable resource then Resource number becomes Material.
DocumentType
In case of Document/work instructions associated to operation, it is document type from document link. It gets cross referenced from ESILookup.prioperties
DocumentNumber
In case of Document/work instructions associated to operation, it is document number from document.
DocumentPart
Cross referenced from ESILookups.properties in case of document/work instructions associated with operation.
DocumentVersion
In case of Document/work instructions associated to operation, it is document number from document.
Equipment
Checks using Cross referenced based on the category of associated consumable resource if it is equipment then Resource number maps to equipment.
RoutingProductionResourceUserArea
Optional. Stores all user-defined data used in customizations.
Routing Component Allocation Schema
The following describes the elements contained in the Routing Component Allocation schema
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the Process Plan OprBomAllocatedParts link; Internal to Windchill MPMLink.
ChangeNumber
Same as BOM schema
TaskListGroup
Process plan number. TaskListGroup is group the group number in SAP.
GroupCounter
In SAP to duplicate a group number you must have a unique group counter. For example for each plant group the numbers will be the same. TIBCO generates a unique group counter for each plant so that Windchill MPMLink process plans can be published to more than one process plan.
SequenceNo
Associated operation's sequence line number.
ValidFrom
Process Plan's (Routing in SAP) start effective date. In SAP it goes to alternate date's valid from date in ECN and Routing object gets assigned this Alternate date in ECN.
ValidToDate
Process plan's end effectivity date. Not mapped in SAP.
Activity
Associated Operation's Operation Label.
OperationID
Associated Operation's Operation number. Internal to Windchill. Here it is used for filtering purposes.
BomType
BOM type of the BOM header. BOM header will be considered the Material, which is associated to the process plan.
CompOty
Associated component quantity
CompUnit
Associated component unit of measure
Plant
Process Plan Plant
Material
Component number
RoutingComponentAllocationUserArea
"Optional. Stores all user-defined data used in customizations.
Resource Schema
The following describes the elements contained in the resource schema.
Element
Description
ObjectHeader
The system information for the current object. For more information, see Common Business Object Schema: Object Header.
WCID
Unique identifier for the Resource; Internal to Windchill MPMLink.
ResourceNumber
Resource Number maps to Material Number of type PRT or Equipment Number of Equipment.
ResourceType
Type of Resource. For example, material or equipment.
CategoryType
Category of Resource. Based on the category that is obtained from the file ESILookups.properties by cross referencing, the resource is published to SAP either as a PRT material or as an equipment. Out of the box, if the value fetched for category is Tool, the resource is published as a PRT material; if the value is Fixture, it is published as an equipment.
Description
Name of resource.
UnitOfMeasure
Default Unit of Resource.
Source
Source of Resource. It maps to SAP as PROC_TYPE. It gets cross referenced from ESILookups.properties based on Source value of Resource.
Effectivity
Values used to determine planning. Contains the following sub-elements:
StartDate
Date when the part becomes effective within the organization.
EndDate
Date when the part effectivity ends.
Does not map in SAP.
Version
Version of Process Material. It maps to the revision level of Material in SAP.
ChangeNumber
Value for the Engineering Change Number for creating, deleting, or updating the part.
Alternates
Contains data on alternate Resource, which can be used if the current resource is out of stock.
CurrentAUM
Contains the Alternate unit of measure for the resource. See Current AUM schema for details.
ResourceUserArea
Optional. Stores all user-defined data used in customizations.