Create and Update Equipment Using ZRFC

엔터프라이즈 관리 > Windchill ESI 구현 > Implementing Windchill ESI in an SAP Environment > SAP API Structures > Create and Update Equipment Using ZRFC

The following API structure tables list all the APIs and the respective API fields that are required to create and update equipment within the current version of SAP distribution targets. These APIs are listed in the order in which they are invoked.

ZRFC_CREATE_EQUIPMENT

SAP does not provide any APIs to create equipment. This custom RFC has been developed using the BDC method provided by SAP.

Windchill Attribute Name	API Structure	API Field	API Field Description	Value If Default Used	Source	Transform
Windchill Attribute Name	API Structure	API Field	API Field Description	Value (if Default Used)	Source	Transform
ToolingNumber	Import parameter	EQUIPMENTN UMBER	Equipment Number	N/A	Windchill	N/A
N/A	Import parameter	EQUIPMENTC ATEGORY	EQUIPME NT CATEGOR Y	P	TIBCO	N/A
N/A	Import parameter	TASKLISTUSA GE	TASKLIST USAGE	009	TIBCO	N/A
N/A	Import parameter	CONTROLKEY	CONTROL KEY	1	TIBCO	N/A
Name		DESCRIPTION	DESCRIPT ION	N/A	Windchill	N/A

ZRFC_MODIFY_EQUIPMENT

SAP does not provide any APIs to modify equipment. This custom RFC has been developed using the BDC method provided by SAP.

Windchill Attribute Name	API Structure	API Field	API Field Description	Value If Default Used	Source	Transform
Tooling Number	Import parameter	EQUIPMENTN UMBER	Equipment Number	N/A	Windchill	N/A

Create and Update Equipment Using BAPI

BAPI NAME: BAPI_EQUI_CREATE

This is a standard BAPI used for creating a single Equipment. The newly created Equipment fields are updated only to the GENERAL and SPECIFIC views. To update the Equipment’s task list usage (009 is set for Routing ) RFC_CALL_TRANSACTION_USING is used.

The BAPI_EQUI_CREATE requires an explicit commit using BAPI_TRANSACTION_COMMIT.

Windchill Attribute Name	API Structure	API Field	API Field Description	Value If Default Used	Source	Transform
Tooling number of the Tool for which the category is “Fixture”		External number	Equipment number		Windchill
Tooling name	DATA_GENERAL	DESCRIPTION	Equipment description		Windchill
	DATA_SPECIFIC	EQUICATGRY	Equipment category. “P” stands for PRT	“P”	TIBCO	Default lookup
	DATA_GENERALX	Flag for DESCRIPTION	Equipment description	“X”	TIBCO	Default lookup
	DATA_SPECIFICX	Flag for EQUICATGRY	Equipment category	“X”	TIBCO	Default lookup

RFC_CALL_TRANSACTION_USING

This is an RFC used to call an SAP transaction (in the background) and to update the transaction fields. The following table contains the TEST DATA for this RFC to update an EQUIPMENT, by calling the IE02 (Equipment Change) transaction code.

FIELD DESCRIPTION

FIELD NAME

VALUES

IMPORT PARAMETERS:

TRANCODE

IE02

MODE

(‘N’ for No-screen-display;

‘E’ for Display-only-error-screens-if-any

‘A’ for all screen display)

Note: To invoke this RFC from a third-party software, the MODE value should be ‘N’.

TABLES:

BT_DATA

There are 7 records for the BT_DATA and all the records need to be in the same order.

PROGRAM

SAPMIEQ0

DYNPRO

0100

DYNBEGIN

FNAM

RM63E-EQUNR

FVAL

For example. EQJAN10

You must enter the equipment number here.

PROGRAM

SAPMIEQ0

DYNPRO

0100

DYNBEGIN

(PASS A SPACE VALUE HERE)

FNAM

BDC_OKCODE

FVAL

/00

PROGRAM

SAPMIEQ0

DYNPRO

0101

DYNBEGIN

FNAM

ITOB-SHTXT

FVAL

CHD FROM RFC....1

You must enter the equipment short description here.

PROGRAM

SAPMIEQ0

DYNPRO

0101

DYNBEGIN

(PASS A SPACE VALUE HERE)

FNAM

BDC_OKCODE

FVAL

=T\05

PROGRAM

SAPMIEQ0

DYNPRO

0101

DYNBEGIN

FNAM

EFHM-PLANV

FVAL

009 (This is task list usage) This value is Defaulted by TIBCO using default lookup.

PROGRAM

SAPMIEQ0

DYNPRO

0101

DYNBEGIN

FNAM

EFHM-STEUF

FVAL

1 (Default lookup by TIBCO)

You must enter the equipment control key here.

PROGRAM

SAPMIEQ0

DYNPRO

0101

DYNBEGIN

(PASS A SPACE VALUE HERE)

FNAM

BDC_OKCODE

FVAL

=BU

BAPI NAME: BAPI_EQUI_CHANGE

This is a standard BAPI used to update a single Equipment. The newly created Equipment fields are updated to the GENERAL and SPECIFIC views only. However, you can use other assisting API’s to update the other required parameters.

The BAPI_EQUI_CREATE requires an explicit commit using BAPI_TRANSACTION_COMMIT.

Windchill Attribute Name	API Structure	API Field	API Field Description	Value If Default Used	Source	Transform
Tooling number of the Tool for which the category is “Fixture”		External number	Equipment number		Windchill
Tooling name	DATA_GENERAL	DESCRIPTION	Equipment description		Windchill
	DATA_SPECIFIC	EQUICATGRY	Equipment category. “P” stands for PRT	“P”	TIBCO	Default lookup
	DATA_GENERALX	Flag for DESCRIPTION	Equipment description	“X”	TIBCO	Default lookup
	DATA_SPECIFICX	Flag for EQUICATGRY	Equipment category	“X”	TIBCO	Default lookup

Creating and Changing Control Characteristics

By default, ESI services will not process control characteristics. The relevant attribute on the distribution target has to be set in order for control characteristics (associated to a part, to a process plan or to an operation) to be processed.

With the distribution target attributes for publishing control characteristics and for publishing alternate parts set, control characteristics associated to an alternate part will be processed as well.

With the distribution target attributes for publishing control characteristics and for publishing substitute parts set, control characteristics associated to a substitute part will be processed as well.

With the distribution target attribute Publish Control Characteristics when Publishing a Process Plan set to Yes, control characteristics associated to an operation will be processed as well, when processing the holding process plan. This happens regardless of the value of the distribution target attribute for publishing control characteristics associated to a part, even if those control characteristics are also associated to a part.

Control characteristics have to be associated to a part or to a manufacturing object (such as a process plan or an operation) in order for ESI services to process them. In order for a control characteristic associated to an operation to be processed, the control characteristic must be associated to its owner.

When processing control characteristics, the quality links that associate a control characteristic to a part, a process plan or an operation are processed as well.

Control characteristics may or may not be associated to model items.

Model items associated to control characteristics will be processed only for newly created or changed control characteristics. Also, only those attributes that are relevant for a given type of model item will be processed.

Attempting to publish a control characteristic whose model item’s EPM document is no longer associated to the owner of the control characteristic will result in a failure.

A control characteristic would be rendered as an unchanged object if it is republished after simply changing its description. In order for the control characteristic to be processed as a changed object, a new version of the object should be released.

Creating Control Characteristic Associations to Operations

The following API structure tables list all the APIs and the respective API fields that are required to create routings with Inspection characteristic within the current version of SAP distribution targets. These APIs are listed in the order in which they are invoked.

BAPI_Routing_Create

This BAPI is used to create Routings with having Operations associated with MICs (Control characteristic link with Operation). The invocation of BAPI_Routing_Create is followed by the BAPI_Transaction_Commit or BAPI_Transaction_Rollback based on success or failure of the call.

Note the following:

• This BAPI requires an explicit COMMIT WORK. So, the BAPI_TRANSACTION_COMMIT needs to be called along with for database updations (Function module Sequence call)

• The creation will always be one time for a particular Routing i.e. you have to pass the values for the tables TASK, OPERATION & INSPCHARACTERISTIC in the single run. It is not possible to first to create the routing & then to transfer/create the MIC association.

Windchill Attribute Name	API Structure	API Field	API Field Description	Value (if Default used)	Source	Transform
Process plan number	TASK	TASK_LIST_G ROUP	Task list group number	N/A	Windchill	N/A
Change Number	TASK	CHANGE_NO	Change number (ECN)	N/A	Windchill	N/A
	TASK	TASK_LIST_U SAGE	Task list usage	N/A	TIBCO	Get value from ESIDefaults.properties
	TASK	TASK_LIST_S TATUS	Task list status	4	TIBCO	Get value from ESIDefaults.properties
Lot	TASK	LOT_SIZE_FR OM	Lot size from	N/A	Windchill	N/A
	TASK	LOT_SIZE_TO	Lot size to	N/A	N/A	N/A
Distribution Target /Plant	TASK	PLANT	Plant of the Task list	N/A	Windchill	N/A
Description	TASK	DESCRIPTION	Short description of the Task list	N/A	Windchill	N/A
Process plan number	OPERATION	TASK_LIST_GROUP	Task list group number	N/A	Windchill	N/A
Sequence Line Number	OPERATION	SEQUENCE_NO	Sequence number	N/A	Windchill	N/A
Change Number	OPERATION	CHANGE_NO	Change number	N/A	Windchill	N/A
Operation Label	OPERATION	ACTIVITY	Operation number	N/A	Windchill	N/A
ErpValidati onCode	OPERATION	CONTROL_KEY	Control Key for the operation	N/A	Windchill/TIBCO	Cross reference
Work Center	OPERATION	WORK_CNTR	Work center of the Operation	N/A	Windchill	N/A
Distribution Target /Plant	OPERATION	PLANT	Operation Plant	N/A	Windchill	N/A
	OPERATION	STANDARD_TEXT_KEY	Standard text key	N/A
Description	OPERATION	DESCRIPTION	Operation description	N/A	Windchill
BaseUnitOf Measure	OPERATION	OPERATION_MEASURE_UNIT	Operation unit of measurement	N/A	Windchill/TIBCO	Cross reference
	OPERATION	DENOMINATOR	Denominator value	N/A	TIBCO
	N/A
	OPERATION	NOMINATOR	Nominator value	N/A	TIBCO	N/A

Quantity	OPERATION	BASE_QUANTITY	Operation base quantity	N/A	Windchill	N/A
Process plan number	INSPCHARACTERISTIC	TASK_LIST_GROUP	Task list group number	N/A	Windchill	N/A
Sequence Line Number	INSPCHARACTERISTIC	SEQUENCE_NO	Sequence number	N/A	Windchill	N/A

Operation Label	INSPCHARACTERISTIC	ACTIVITY	Operation number	N/A	Windchill	N/A
	INSPCHARACTERISTIC	INSPCHAR	Inspection Characteristic Number. (The number that explicitly identifies an inspection characteristic within an operation in an inspection plan)	N/A	SAP/ZRFC	N/A
	INSPCHARACTERISTIC	VALID_FROM	Valid from date of the MIC association with Routing's operation	Current system date	TIBCO	Convert to SAP date format
Change Number	INSPCHARACTERISTIC	CHANGE_NO	Engineering Change number (ECN)	N/A	Windchill	N/A
Model Item Reference	INSPCHARACTERISTIC	QUANTITATIVE_IND	The indicator for Quantitative type	X	TIBCO	Get value from ESIDefaults.properties
CC Number	INSPCHARACTERISTIC	MSTR_CHAR	Number to uniquely identify a MIC	N/A	Windchill	N/A
Distribution Target /Plant	INSPCHARACTERISTIC	PMSTR_CHAR	Plant of the Master Inspection Characteristics (MIC)	N/A	Windchill	N/A
	INSPCHARACTERISTIC	CHA_MASTER_IMPORT_MODUS	Mode for Reference to Master Inspection Characteristic	N/A	TIBCO	Get value from ESIDefaults.properties
CC Description	INSPCHARACTERISTIC	CHAR_DESCR	Inspection Characteristic description	N/A	Windchill	N/A
	INSPCHARACTERISTIC	UP_TOL_LMT_IND	Indicator for Upper specification limit	X	TIBCO	Get value from ESIDefaults.properties
	INSPCHARACTERISTIC	LW_TOL_LMT_IND	Indicator for Lower specification limit	X	TIBCO	Get value from ESIDefaults.properties
	INSPCHARACTERISTIC	TARGET_VAL_CHECK_IND	Indicator for Target value	X	TIBCO	Get valueESIDefaults.properties
Model Item Reference /No Of Decimal places	INSPCHARACTERISTIC	DEC_PLACES	Number of decimal places for accuracy	N/A	Windchill	N/A
Model Item Reference / Unit of Measurement	INSPCHARACTERISTIC	MEAS_UNIT	Unit-of-Measurement		Windchill/TIBCO	Cross referenced from ESILookups.properties
Model Item Reference / Target Value	INSPCHARACTERISTIC	TARGET_VAL	Target value	N/A	Windchill	N/A

Model Item Reference / Upper Target Value	INSPCHARACTERISTIC	UP_TOL_LMT	Upper specification limit	N/A	Windchill	N/A
Model Item Reference / Lower Target Value	INSPCHARACTERISTIC	LW_TOL_LMT	Lower specification limit	N/A	Windchill	N/A

BAPI_TRANSACTION_COMMIT

This API is used to commit a transaction to the SAP system. If the return message generated from executing the BAPI_ROUTING_CREATE API is a success, then this API will be executed. When this API is executed, all MIC data sent from Windchill PDMLink are committed to the QMSP database table. Refer to the Windchill Enterprise Systems Integration Customizer's Guide - SAP(Windchill Enterprise Systems Integration 사용자정의 안내서 - SAP) for an explanation of howWindchill ESI interprets the results of the SAP API calls. The following table provides details on this API.

No data is passed through the BAPI_TRANSACTION_COMMIT function module but it is necessary to call the module to release the material in case invalid data is passed through. There are no variations of data inputs for this API for different data requirements. Refer to Windchill Enterprise Systems Integration Customizer's Guide - SAP(Windchill Enterprise Systems Integration 사용자정의 안내서 - SAP) for an explanation of how SAP APIs are called in sequence to execute each business function.

Windchill Attribute Name	API Structure	API Field	API Field Description	Value (if Default used)	Source	Transform
N/A	HEADER	Wait	Wait	X	Default	N/A

BAPI_TRANSACTION_ROLLBACK

This API is used to rollback a transaction to the SAP distribution target. If the return message generated from the BAPI_ROUTING_CREATE function is not a success then this API will be executed. When this API is executed, all MIC data sent from Windchill PDMLink is rolled back. Refer to the Windchill Enterprise Systems Integration Customizer's Guide - SAP(Windchill Enterprise Systems Integration 사용자정의 안내서 - SAP)for an explanation of how Windchill ESI interprets the results of the SAP API calls. The following table provides details on this API.

No data is passed through the BAPI_TRANSACTION_ROLLBACK function module but it is necessary to call the module. Refer to the Windchill Enterprise Systems Integration Customizer's Guide - SAP(Windchill Enterprise Systems Integration 사용자정의 안내서 - SAP) for an explanation of how SAP APIs are called in sequence to execute each Windchill ESI business function.

Changing or Deleting Control Characteristic Links With Operations

The following API structure table lists the API fields that are required to create/change/delete MIC associations with Routing operations within the current version of SAP distribution targets.

ZRFC_MAINTAIN_MAT_SPEC

SAP does not provide any standard APIs to create/change/delete MIC associations with Routing operations (Transaction code: CA02). This custom RFC has been developed using the BDC method provided by SAP, which records the screen and its' fields, which are used to fill the values on the screen.

This custom-RFC is developed and tested in standard SAP IDES system instances (ECC 6.0, ECC 6.06, ECC6.07, and ECC6.08). The RFC fails if there is a difference in the screens or screen-flows (if any in your SAP systems).

Although this BAPI is not declared as “commit required” by SAP, from external system for multi threading mode, it is required to call BAPI_TRANSACTION_COMMIT to end the session otherwise locking errors may occur.

Further details on the RFC can be seen at the RFC DOCUMENTATION.

Windchill Attribute Name	API Structure	API Field	API Field Description	Value (if Default used)	Source	Transform

Process plan number		GROUP_NUMBER	Task list group number	N/A	Windchill	N/A
Distribution Target /Plant		ROUTING_PLANT	Plant of the Task list	N/A	Windchill	N/A
		KEY_DATE	Valid from date	Current system date	TIBCO	Convert to SAP Date format
Change Number		CHANGE_NUMBER	Change number (ECN)	N/A	Windchill	N/A
		DEL_INSP_CHAR	Indicator for Disassociating Inspection characteristic with Operations	X	TIBCO	Get value from ESIDefaults.properties
		UPD_INSP_CHAR	Indicator for updating the Inspection characteristic association with Operations	X	TIBCO	Get value from ESIDefaults.properties
		INS_INSP_CHAR	Indicator for newly associating Inspection characteristic with Operations	X	TIBCO	Get value from ESIDefaults.properties
Sequence Line Number	T_DELETE_INSP_CHAR	SEQUENCE_NO	Sequence number	N/A	Windchill	N/A
Operation Label	T_DELETE_INSP_CHAR	OPERATION	Operation number	N/A	Windchill	N/A
	T_DELETE_INSP_CHAR	CHARACTERISTIC_NUMBER	Inspection Characteristic Number. (The number that explicitly identifies an inspection characteristic within an operation in an inspection plan)	N/A	SAP/ZRFC
CC Number	T_DELETE_INSP_CHAR	MIC	Number to uniquely identify a MIC	N/A	Windchill	N/A
Distribution Target /Plant	T_DELETE_INSP_CHAR	PLANT_MIC	Plant of the MIC	N/A	Windchill	N/A
	T_DELETE_INSP_CHAR	VERSION	Version of the MIC	000001	TIBCO	Get value from ESIDefaults.properties
Sequence Line Number	T_UPDATE_INSP_CHAR	SEQUENCE_NO	Sequence number	N/A	Windchill	N/A
Operation Label	T_UPDATE_INSP_CHAR	OPERATION	Operation number	N/A	Windchill	N/A
	T_UPDATE_INSP_CHAR	CHARACTERISTIC_NUMBER	Inspection Characteristic Number. (The number that explicitly identifies an inspection characteristic within an operation in an inspection plan)	N/A	SAP/ZRFC
CC Number	T_UPDATE_INSP_CHAR	MIC	Number to uniquely identify a MIC	N/A	Windchill	N/A
Distribution Target /Plant	T_UPDATE_INSP_CHAR	PLANT_MIC	Plant of the MIC	N/A	Windchill	N/A
	T_UPDATE_INSP_CHAR	VERSION	Version of the MIC	000001	TIBCO	Get value from ESIDefaults.properties
Model Item Reference / Upper Target Value	T_UPDATE_INSP_CHAR	UP_TOL_LMT	Upper specification limit	N/A	Windchill	N/A
Model Item Reference / Target Value	T_UPDATE_INSP_CHAR	TARGET_VALUE	Target value	N/A	Windchill	N/A
Model Item Reference / Lower Target Value	T_UPDATE_INSP_CHAR	LW_TOL_LMT	Lower specification limit	N/A	Windchill	N/A
Model Item Reference / No Of Decimal places	T_UPDATE_INSP_CHAR	DEC_PLACES	Number of decimal places for accuracy	N/A	Windchill	N/A
Sequence Line Number	T_INSERT_INSP_CHAR	SEQUENCE_NO	Sequence number	N/A	Windchill	N/A
Operation Label	T_INSERT_INSP_CHAR	OPERATION	Operation number	N/A	Windchill	N/A
	T_INSERT_INSP_CHAR	CHARACTERISTIC_NUMBER	Inspection Characteristic Number. (The number that explicitly identifies an inspection characteristic within an operation in an inspection plan)	N/A	SAP/ZRFC
CC Number	T_INSERT_INSP_CHAR	MIC	Number to uniquely identify a MIC	N/A	Windchill	N/A
Distribution Target /Plant	T_INSERT_INSP_CHAR	PLANT_MIC	Plant of the MIC	N/A	Windchill	N/A
	T_INSERT_INSP_CHAR	VERSION	Version of the MIC	000001	TIBCO	Get value from ESIDefaults.properties
Model Item Reference / Upper Target Value	T_INSERT_INSP_CHAR	UP_TOL_LMT	Upper specification limit	N/A	Windchill	N/A
Model Item Reference / Target Value	T_INSERT_INSP_CHAR	TARGET_VALUE	Target value	N/A	Windchill	N/A
Model Item Reference / Lower Target Value	T_INSERT_INSP_CHAR	LW_TOL_LMT	Lower specification limit	N/A	Windchill	N/A
Model Item Reference / No Of Decimal places	T_INSERT_INSP_CHAR	DEC_PLACES	Number of decimal places for accuracy	N/A	Windchill

Creating and Deleting Control Characteristic Associations with Parts

The following API structure table lists the API fields that are required to create or delete MIC associations with a Material specification (or Part) within the current version of SAP distribution targets.

ZRFC_MAINTAIN_MAT_SPEC

SAP does not provide any standard APIs to create/update/delete MIC associations with a Material specification (Transaction code: QS61). This custom RFC has been developed using the BDC method provided by SAP, which records the screen and its' fields, which are used to fill the values on the screen.

This custom-RFC is developed and tested in standard SAP IDES system instances (ECC 5.0 & ECC 6.0). The RFC fails if there is a difference in the screens or screen-flows (if any in your SAP systems).

Although this ZRFC is not declared as “commit required”, from external system for multi threading mode, it is required to call BAPI_TRANSACTION_COMMIT to end the session otherwise locking errors may occur.

Further details on the RFC can be seen at the RFC DOCUMENTATION.

Windchill Attribute Name	API Structure	API Field	API Field Description	Value (if Default used)	Source	Transform
Part		MATERIAL	Material specification (Part number)	N/A	Windchill	N/A
		DELETE_MIC	Indicator to delete MIC association with material specification	X	TIBCO	Get value from ESIDefaults.properties
		INSERT_MIC	Indicator to create MIC association with material specification	X	TIBCO	Get value from ESIDefaults.properties
Distribution Target/Plant	T_DELETE_MIC	PLANT_MIC	Plant of the Master Inspection Characteristics (MIC)	N/A	Windchill	N/A
	T_DELETE_MIC	MIC	Number to uniquely identify a MIC	N/A	Windchill	N/A
	T_DELETE_MIC	VERSION	MIC version number	000001	TIBCO	Get value from ESIDefaults.properties
	T_DELETE_MIC	PLANT_MIC	Plant of the Master Inspection Characteristics (MIC)	N/A	Windchill	N/A
	T_DELETE_MIC	MIC	Number to uniquely identify a MIC	N/A	Windchill	N/A
	T_DELETE_MIC	VERSION	MIC version	000001	TIBCO	Get value from ESIDefaults.properties