Configuring the Creo Elements/Direct Drafting Worker

Integración con otras aplicaciones > Documentación de Windchill Workgroup Manager > Creo Elements/Direct Drafting > Advanced Techniques > Configuring the Creo Elements/Direct Drafting Worker

You can configure the Creo Elements/Direct Drafting worker under different scenarios. In the simplest scenario, the worker and worker agent are on the same machine. For information on different scenarios for worker configurations, see Configuring the Worker Agent.

For Creo Elements/Direct Drafting, perform the following steps:

1. Follow steps 1 through step 4 in Configuring a Worker on the Same Machine.

2. In the Add Worker panel, specify the following parameters:

◦ Host: Host name where Creo View Object Adapters are installed and worker scrips are generated. For information on worker scripts, in the Creo ViewMCAD Adapters 3.1 Installation and Configuration Guide, see ccdraftworker Overview.

◦ Data Type: Specify COCRDRAFT.

3. For Steps 3 through Step 9, see Configuring the Creo Elements/Direct Modeling Worker.

In the Worker Execution Command panel, ensure that you use the Drafting worker script and use the Drafting batch file ccdraftworker.bat.