Specialized Administration > Supporting Visualization and Publishing > Configuring Automated Publishing of Viewables > Introduction to Automated Publishing > Configuring the Creo View Adapter as a WVS Worker
  
Configuring the Creo View Adapter as a WVS Worker
You must configure your Creo View adapter as a WVS worker for Windchill to use the adapter as a part of the WVS Automated Publishing mechanism. Follow the steps below to define a remote worker on the machine.
For an introduction to local and remote workers, including the Common File Systems, see Introduction to the Worker Agent.
1. Configure a Common File System to transfer files from the Windchill server to the remote worker and to retrieve the generated Creo View viewables.
◦ For general information, refer to Guidelines for Configuring a Worker “Common File System”.
◦ To configure the Common File System, see Adding a Worker to a Different Windows Machine.
2. Configure a new remote worker using the WVS Worker Agent Administration.
See Adding a Worker to a Different Windows Machine.
3. Configure the WVS worker whitelist using the worker.exe.whitelist.prefixes properties.
See Enhanced Security Measures in Worker Configuration.
4. Start the worker.
See Test 1: Starting the Worker in the Windchill Help Center.
5. Test the new worker configuration and the Common File System from Windchill Server using the Worker Agent Administration.
◦ For testing a simple, non-File Synchronization enabled worker, see Testing the Worker Agent Configuration.
◦ For troubleshooting information about FTP Common File System testing, see Testing the FTP or FTPS Server Configuration.
* 
• For Creo Parametric workers—File Synchronization must be configured before you can publish Windchill CAD data.
• For all other MCAD workers—You can now publish Windchill CAD data, but the worker does not perform File Synchronization.
Information on setting up File Synchronization appears later in this chapter.
6. Familiarize yourself with the WVS Job Monitor.
See About the WVS Job Monitor in the Windchill Help Center.
Your worker machine is now configured as a WVS worker. Proceed to the next section to configure the recipe settings.