Running the Assistant in Interactive Mode
When you are working in interactive mode, each recommended value is displayed in an [input] line on the command line. For example:
[input] Number of MethodServers to configure (current=1): [2]
If there is a current value defined, it is included on the line in the parenthetical phrase (current=x) where x is the current value. In the example, the current value is 1.
The recommended value is the value supplied at the end of the line inside the brackets []. In the example, the recommended value is 2.
Some inputs require specific values. When this is the case, the acceptable values are presented in parentheses at the end of the input line and the recommended value is inside brackets []. For example, the following input line shows the free and total values as the values you can enter and the recommended value is free:
[input] Allocate Windchill Memory region from total (16378 MB)
or free (10986 MB) physical memory ([free], total)
To override the recommended value, enter a new value at the prompt and press return. To accept the recommended value, just press return.